From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCHv4 1/7] mtd: Sort subsystem directories aplhabeticaly in Makefile
Date: Thu, 21 Jan 2016 07:04:39 +0100 [thread overview]
Message-ID: <56A074F7.9090403@denx.de> (raw)
In-Reply-To: <20160117031107.GB28493@localhost.localdomain>
Hello Ladislav,
Am 17.01.2016 um 04:11 schrieb Ladislav Michl:
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> ---
> drivers/Makefile | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Reviewed-by: Heiko Schocher <hs@denx.de>
bye,
Heiko
>
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 00da40b..1b9f8d6 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -18,14 +18,14 @@ obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
> obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
> obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
> obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
> -obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
> obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
> obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
> obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
> +obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/
> obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
> obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/
> -obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/
> obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
> +obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
> obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
> obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
> obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2016-01-21 6:04 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-17 3:09 [U-Boot] [PATCHv4 0/7] spl: Lightweight UBI and UBI fastmap support Ladislav Michl
2016-01-17 3:11 ` [U-Boot] [PATCHv4 1/7] mtd: Sort subsystem directories aplhabeticaly in Makefile Ladislav Michl
2016-01-21 6:04 ` Heiko Schocher [this message]
2016-01-17 3:12 ` [U-Boot] [PATCHv4 2/7] nand_spl_simple: Add a simple NAND read function Ladislav Michl
2016-01-21 6:05 ` Heiko Schocher
2016-01-17 3:13 ` [U-Boot] [PATCHv4 3/7] spl: Lightweight UBI and UBI fastmap support Ladislav Michl
2016-01-17 3:13 ` [U-Boot] [PATCHv4 4/7] spl: support loading from UBI volumes Ladislav Michl
2016-01-21 6:06 ` Heiko Schocher
2016-01-17 3:15 ` [U-Boot] [PATCHv5 5/7] spl: zImage support in Falcon mode Ladislav Michl
2016-01-21 6:07 ` Heiko Schocher
2016-01-17 3:16 ` [U-Boot] [PATCHv7 6/7] igep00x0: UBIize Ladislav Michl
2016-01-21 6:07 ` Heiko Schocher
2016-01-22 22:35 ` Enric Balletbo Serra
2016-01-24 13:44 ` Ladislav Michl
2016-01-25 6:39 ` Heiko Schocher
2016-01-25 7:26 ` Enric Balletbo Serra
2016-01-25 8:13 ` Heiko Schocher
2016-01-25 15:56 ` Ladislav Michl
2016-01-25 16:56 ` Enric Balletbo Serra
2016-04-13 5:19 ` Heiko Schocher
2016-04-13 11:39 ` Enric Balletbo Serra
2016-04-19 10:15 ` Enric Balletbo Serra
2016-06-04 20:48 ` [U-Boot] [RFC] runtime mtdparts_default; was: " Ladislav Michl
2016-01-25 15:13 ` [U-Boot] [PATCHv7 6/7] " Tom Rini
2016-01-25 15:35 ` Heiko Schocher
2016-01-17 3:16 ` [U-Boot] [PATCHv4 7/7] igep00x0: Falcon mode Ladislav Michl
2016-01-21 6:08 ` Heiko Schocher
2016-01-22 22:38 ` Enric Balletbo Serra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56A074F7.9090403@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox