public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCHv5 5/7] spl: zImage support in Falcon mode
Date: Thu, 21 Jan 2016 07:07:01 +0100	[thread overview]
Message-ID: <56A07585.1070508@denx.de> (raw)
In-Reply-To: <20160117031503.GF28493@localhost.localdomain>

Hello Ladislav,

Am 17.01.2016 um 04:15 schrieb Ladislav Michl:
> Other payload than uImage is currently considered to be raw U-Boot
> image. Check also for zImage in Falcon mode.
>
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> ---
>   arch/arm/lib/Makefile |  2 ++
>   arch/arm/lib/bootm.c  | 32 --------------------------------
>   arch/arm/lib/zimage.c | 40 ++++++++++++++++++++++++++++++++++++++++
>   common/spl/spl.c      | 23 +++++++++++++++++++++++
>   4 files changed, 65 insertions(+), 32 deletions(-)
>   create mode 100644 arch/arm/lib/zimage.c

Reviewed-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
>
> diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
> index f3db7b5..07a9019 100644
> --- a/arch/arm/lib/Makefile
> +++ b/arch/arm/lib/Makefile
> @@ -26,11 +26,13 @@ endif
>   obj-$(CONFIG_CPU_V7M) += cmd_boot.o
>   obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
>   obj-$(CONFIG_CMD_BOOTM) += bootm.o
> +obj-$(CONFIG_CMD_BOOTM) += zimage.o
>   obj-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
>   obj-$(CONFIG_USE_ARCH_MEMSET) += memset.o
>   obj-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o
>   else
>   obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
> +obj-$(CONFIG_SPL_FRAMEWORK) += zimage.o
>   endif
>   obj-$(CONFIG_SEMIHOSTING) += semihosting.o
>
> diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
> index a477cae..fbfc0ad 100644
> --- a/arch/arm/lib/bootm.c
> +++ b/arch/arm/lib/bootm.c
> @@ -348,38 +348,6 @@ int do_bootm_linux(int flag, int argc, char * const argv[],
>   	return 0;
>   }
>
> -#ifdef CONFIG_CMD_BOOTZ
> -
> -struct zimage_header {
> -	uint32_t	code[9];
> -	uint32_t	zi_magic;
> -	uint32_t	zi_start;
> -	uint32_t	zi_end;
> -};
> -
> -#define	LINUX_ARM_ZIMAGE_MAGIC	0x016f2818
> -
> -int bootz_setup(ulong image, ulong *start, ulong *end)
> -{
> -	struct zimage_header *zi;
> -
> -	zi = (struct zimage_header *)map_sysmem(image, 0);
> -	if (zi->zi_magic != LINUX_ARM_ZIMAGE_MAGIC) {
> -		puts("Bad Linux ARM zImage magic!\n");
> -		return 1;
> -	}
> -
> -	*start = zi->zi_start;
> -	*end = zi->zi_end;
> -
> -	printf("Kernel image @ %#08lx [ %#08lx - %#08lx ]\n", image, *start,
> -	      *end);
> -
> -	return 0;
> -}
> -
> -#endif	/* CONFIG_CMD_BOOTZ */
> -
>   #if defined(CONFIG_BOOTM_VXWORKS)
>   void boot_prep_vxworks(bootm_headers_t *images)
>   {
> diff --git a/arch/arm/lib/zimage.c b/arch/arm/lib/zimage.c
> new file mode 100644
> index 0000000..f870d72
> --- /dev/null
> +++ b/arch/arm/lib/zimage.c
> @@ -0,0 +1,40 @@
> +/*
> + * Copyright (C) 2016
> + * Ladislav Michl <ladis@linux-mips.org>
> + *
> + * bootz code:
> + * Copyright (C) 2012 Marek Vasut <marek.vasut@gmail.com>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +#include <common.h>
> +
> +#define	LINUX_ARM_ZIMAGE_MAGIC	0x016f2818
> +
> +struct arm_z_header {
> +	uint32_t	code[9];
> +	uint32_t	zi_magic;
> +	uint32_t	zi_start;
> +	uint32_t	zi_end;
> +} __attribute__ ((__packed__));
> +
> +int bootz_setup(ulong image, ulong *start, ulong *end)
> +{
> +	struct arm_z_header *zi = (struct arm_z_header *) image;
> +
> +	if (zi->zi_magic != LINUX_ARM_ZIMAGE_MAGIC) {
> +#ifndef CONFIG_SPL_FRAMEWORK
> +		puts("Bad Linux ARM zImage magic!\n");
> +#endif
> +		return 1;
> +	}
> +
> +	*start = zi->zi_start;
> +	*end = zi->zi_end;
> +#ifndef CONFIG_SPL_FRAMEWORK
> +	printf("Kernel image @ %#08lx [ %#08lx - %#08lx ]\n", image, *start,
> +	      *end);
> +#endif
> +
> +	return 0;
> +}
> diff --git a/common/spl/spl.c b/common/spl/spl.c
> index b945a48..7fd8e5d 100644
> --- a/common/spl/spl.c
> +++ b/common/spl/spl.c
> @@ -52,6 +52,15 @@ __weak int spl_start_uboot(void)
>   	puts("SPL: Direct Linux boot not active!\n");
>   	return 1;
>   }
> +
> +/*
> + * Weak default function for arch specific zImage check. Return zero
> + * and fill start and end address if image is recognized.
> + */
> +int __weak bootz_setup(ulong image, ulong *start, ulong *end)
> +{
> +	 return 1;
> +}
>   #endif
>
>   /*
> @@ -112,6 +121,20 @@ void spl_parse_image_header(const struct image_header *header)
>   		 */
>   		panic("** no mkimage signature but raw image not supported");
>   #else
> +#ifdef CONFIG_SPL_OS_BOOT
> +		ulong start, end;
> +
> +		if (!bootz_setup((ulong)header, &start, &end)) {
> +			spl_image.name = "Linux";
> +			spl_image.os = IH_OS_LINUX;
> +			spl_image.load_addr = CONFIG_SYS_LOAD_ADDR;
> +			spl_image.entry_point = CONFIG_SYS_LOAD_ADDR;
> +			spl_image.size = end - start;
> +			debug("spl: payload zImage, load addr: 0x%x size: %d\n",
> +				spl_image.load_addr, spl_image.size);
> +			return;
> +		}
> +#endif
>   		/* Signature not found - assume u-boot.bin */
>   		debug("mkimage signature not found - ih_magic = %x\n",
>   			header->ih_magic);
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

  reply	other threads:[~2016-01-21  6:07 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-17  3:09 [U-Boot] [PATCHv4 0/7] spl: Lightweight UBI and UBI fastmap support Ladislav Michl
2016-01-17  3:11 ` [U-Boot] [PATCHv4 1/7] mtd: Sort subsystem directories aplhabeticaly in Makefile Ladislav Michl
2016-01-21  6:04   ` Heiko Schocher
2016-01-17  3:12 ` [U-Boot] [PATCHv4 2/7] nand_spl_simple: Add a simple NAND read function Ladislav Michl
2016-01-21  6:05   ` Heiko Schocher
2016-01-17  3:13 ` [U-Boot] [PATCHv4 3/7] spl: Lightweight UBI and UBI fastmap support Ladislav Michl
2016-01-17  3:13 ` [U-Boot] [PATCHv4 4/7] spl: support loading from UBI volumes Ladislav Michl
2016-01-21  6:06   ` Heiko Schocher
2016-01-17  3:15 ` [U-Boot] [PATCHv5 5/7] spl: zImage support in Falcon mode Ladislav Michl
2016-01-21  6:07   ` Heiko Schocher [this message]
2016-01-17  3:16 ` [U-Boot] [PATCHv7 6/7] igep00x0: UBIize Ladislav Michl
2016-01-21  6:07   ` Heiko Schocher
2016-01-22 22:35     ` Enric Balletbo Serra
2016-01-24 13:44       ` Ladislav Michl
2016-01-25  6:39       ` Heiko Schocher
2016-01-25  7:26         ` Enric Balletbo Serra
2016-01-25  8:13           ` Heiko Schocher
2016-01-25 15:56           ` Ladislav Michl
2016-01-25 16:56             ` Enric Balletbo Serra
2016-04-13  5:19               ` Heiko Schocher
2016-04-13 11:39                 ` Enric Balletbo Serra
2016-04-19 10:15                   ` Enric Balletbo Serra
2016-06-04 20:48             ` [U-Boot] [RFC] runtime mtdparts_default; was: " Ladislav Michl
2016-01-25 15:13         ` [U-Boot] [PATCHv7 6/7] " Tom Rini
2016-01-25 15:35           ` Heiko Schocher
2016-01-17  3:16 ` [U-Boot] [PATCHv4 7/7] igep00x0: Falcon mode Ladislav Michl
2016-01-21  6:08   ` Heiko Schocher
2016-01-22 22:38     ` Enric Balletbo Serra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56A07585.1070508@denx.de \
    --to=hs@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox