From mboxrd@z Thu Jan  1 00:00:00 1970
From: Hans de Goede <hdegoede@redhat.com>
Date: Thu, 21 Jan 2016 19:02:11 +0100
Subject: [U-Boot] [PATCH 0/4] sunxi: PSCI support for H3
In-Reply-To: <1452064389-14816-1-git-send-email-wens@csie.org>
References: <1452064389-14816-1-git-send-email-wens@csie.org>
Message-ID: <56A11D23.3020707@redhat.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi,

On 01/06/2016 08:13 AM, Chen-Yu Tsai wrote:
> Hi everyone,
>
> This series enables PSCI support for the H3. Like other Allwinner SoCs,
> the implementation only supports PSCI 0.1, specifically only secondary
> CPU boot/hotplug.
>
> Patch 1 supports the SMTA (previously called TZPC) TrustZone hardware
> on H3. This controls non-secure access to some important hardware blocks.
>
> Patch 2 supports the security switch in H3's CCU. This is H3 only. No
> other SoCs have this feature.
>
> Patch 3 supports H3 using sun6i PSCI implementation. H3 uses the same
> power sequence as sun6i, including the power clamps. This is shown in
> Allwinner's SDK, and confirmed / tested by Siarhei.
>
> Patch 4 enables PSCI support for the H3 in Kconfig.
>
>
> I've only tested booting HYP/SMP on my Orange Pi PC. Hotplugging was not
> tested, but should work.

Many thanks for this patch-set, I've applied this to my tree, and it will
be part of the pull-req I plan to send out this weekend.

Regards,

Hans