[U-Boot] [PATCH 2/7] arm: colibri-vf: Enable serial support

[Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>]

Hi Bin,

On 01/22/2016 03:22 PM, Bin Meng wrote:
> Hi Bhuvanchandra,
>
> On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
> <bhuvanchandra.dv@toradex.com> wrote:
>> ---
>
> Please always include a commit message.

Okay

>
>>   arch/arm/dts/vf-colibri.dtsi     | 10 ++++++++++
>>   configs/colibri_vf_dtb_defconfig |  1 +
>>   2 files changed, 11 insertions(+)
>>
>> diff --git a/arch/arm/dts/vf-colibri.dtsi b/arch/arm/dts/vf-colibri.dtsi
>> index 7a8e9bee..0718486 100644
>> --- a/arch/arm/dts/vf-colibri.dtsi
>> +++ b/arch/arm/dts/vf-colibri.dtsi
>> @@ -10,6 +10,12 @@
>>    */
>>   #include "vf.dtsi"
>>
>> +/ {
>> +       chosen {
>> +               stdout-path = &uart0;
>> +       };
>> +};
>> +
>>   &dspi1 {
>>          status = "okay";
>>          bus-num = <1>;
>> @@ -19,3 +25,7 @@
>>                  spi-max-frequency = <50000000>;
>>          };
>>   };
>> +
>> +&uart0 {
>> +       status = "okay";
>> +};
>> diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig
>
> Why adding _dtb here? Can we update the existing defconfig files?
>
>> index b1a843a..b204fb8 100644
>> --- a/configs/colibri_vf_dtb_defconfig
>> +++ b/configs/colibri_vf_dtb_defconfig
>> @@ -11,4 +11,5 @@ CONFIG_OF_CONTROL=y
>>   CONFIG_DM=y
>>   CONFIG_NAND_VF610_NFC=y
>>   CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
>> +CONFIG_DM_SERIAL=y
>>   CONFIG_FSL_LPUART=y
>> --
>
> Please try to insert new Kconfig options in a correct order. You can
> get it via 'make savedefconfig'.

Will do it.

>
> Regards,
> Bin
>

-- 
Best regards,
Bhuvan