From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Smith Date: Tue, 26 Jan 2016 16:56:21 +0000 Subject: [U-Boot] [PATCH v2 0/2] net: phy: mv88e61xx: Revise as a PHY driver In-Reply-To: References: <1450734319-9515-1-git-send-email-kevin.smith@elecsyscorp.com> <1450734319-9515-2-git-send-email-kevin.smith@elecsyscorp.com> <20160126170959.32bbae7c@lilith> Message-ID: <56A7A537.10209@elecsyscorp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Albert, On 01/26/2016 10:13 AM, Joe Hershberger wrote: > Hi Albert, > > On Tue, Jan 26, 2016 at 10:09 AM, Albert ARIBAUD > wrote: >> Hello Kevin, >> >> On Mon, 21 Dec 2015 21:45:32 +0000, Kevin Smith >> wrote: >>> The previous version of this driver implemented a shell command to manually >>> comfigure the switch. It did not integrate with the PHY infrastructure to >>> allow a MAC to use it as its PHY. This is a complete rewrite to allow this >>> switch to function as a driver. Since none of the original driver remains, the >>> old driver is first removed and the new PHY driver is added. >>> >>> This version configures the switch to have a CPU connected over an MII >>> interface. It will enable PHY interfaces based on the MV88E61XX_PHY_PORTS >>> macro. The switch is configured to allow PHY ports to only communicate to the >>> CPU. This allows the switch to be used as a basic PHY on any/all ports. >>> >>> This was developed on a board with an mv88e6176 connected over SGMII. It is >>> intended to work with other configurations, but these could not be tested. Any >>> testing on other configurations or with other mv88e61xx chips is appreciated. >> Actually the driver was for the Wireless Space, which was removed but >> which I will resurrect as I did the Open-RDs. I will test the switch on >> the WS I have. > That's great. I'm currently reviewing the new driver and will > appreciate the testing. I don't have any boards with this switch. > > Thanks, > -Joe Could you please send me more info on the Wireless Space board? I would like something other than our custom board to test this on. I tried to get a Marvell RD-A370, but they are too expensive. I will be glad to add back in the command-line interface for configuring this board if it is needed to support your work. Thanks for testing, Kevin P.S. I did not receive your e-mail at my business address somehow; I added my personal e-mail to ensure I get your responses.