From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Banan Pro (ahci-sunxi) SATA port stopped working after switching to U-Boot v2016.01
Date: Tue, 26 Jan 2016 20:42:08 +0100 [thread overview]
Message-ID: <56A7CC10.2040305@redhat.com> (raw)
In-Reply-To: <56A237A4.7020201@redhat.com>
Hi,
On 01/22/2016 03:07 PM, Hans de Goede wrote:
> Hi,
>
> On 21-01-16 00:34, Markus Baier wrote:
>> Am 19.01.2016 um 18:12 schrieb Tom Rini:
>> > On Sun, Jan 17, 2016 at 09:44:53PM +0100, Markus Baier wrote:
>> >
>> >> Hello,
>> >>
>> >> tonight I switched to the new U-Boot v2016.01
>> >> on my Banana Pro system.
>> >> I compiled u-boot, like I did with all the working
>> >> versions before, with:
>> >> make Bananapro_defconfig
>> >> make
>> >>
>> >> But with the new U-Boot installed the SATA Port
>> >> did not work anymore.
>> >> The Kernel is the same 4.0.9-gentoo as I used before
>> >> with the last U-Boot Release v2015.10
>> >>
>> >> dmesg show me the following error in the kernel log:
>> >> [ 1.925032] ahci-sunxi 1c18000.sata: PHY power up failed.
>> >> [ 1.930661] ahci-sunxi: probe of 1c18000.sata failed with error -5
>> >>
>> >> I also see now SATA message at the U-Boot bootscreen,
>> >> the v2015.10 shows me that a SATA Port was recognized
>> >> by the U-Boot loader.
>> >
>> > Can you please use git bisect to determine which commit broke this?
>> > Thanks!
>>
>> Hi,
>>
>> thanks for the advice, I have found the bad commit,
>> it is -> 02cc27c74f9b884b538bcd1b93342a4c05b5d608
>> sunxi: power: Change axp209 LDO3 and LDO4 default to disabled
>>
>> after that I tried the v2016.01 release again, but changed
>> the two lines in config AXP_ALDO3_VOLT and config AXP_ALDO4_VOLT
>> back to their old values, now the SATA Port is working again.
>
> Thanks for debugging this, according to the Bananapro schematic
> VDD25-SATA either comes from a dedicated WL2003E25-5 linear regulator,
> or it is connected to LDO4 via a 0 Ohm resistor.
>
> So it would seem that in practice it seems that LDO4 is used, can you
> give the attached patch a try ?
I had access to a bananapro board myself today, and I can confirm that
the patch I wrote fixes this.
Regards,
Hans
next prev parent reply other threads:[~2016-01-26 19:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-20 23:34 [U-Boot] Banan Pro (ahci-sunxi) SATA port stopped working after switching to U-Boot v2016.01 Markus Baier
2016-01-22 14:07 ` Hans de Goede
2016-01-22 18:47 ` Peter Korsgaard
2016-01-26 19:42 ` Hans de Goede [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-01-17 20:44 Markus Baier
2016-01-19 17:12 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56A7CC10.2040305@redhat.com \
--to=hdegoede@redhat.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox