From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Wed, 27 Jan 2016 14:15:46 +0100 Subject: [U-Boot] [PATCH] ARM: zynq: Add function to get reboot status register value. In-Reply-To: <1453893754-1187-1-git-send-email-moritz.fischer@ettus.com> References: <1453893754-1187-1-git-send-email-moritz.fischer@ettus.com> Message-ID: <56A8C302.3050604@xilinx.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 27.1.2016 12:22, Moritz Fischer wrote: > Signed-off-by: Moritz Fischer > --- > Hi Michal, > > I was planning to use this in future to boot into recovery mode. > The change is small enough I feel that we could directly take it. > If you want to hold off until there's a user that's fine for me, too. > > Cheers, > > Moritz > --- > arch/arm/mach-zynq/slcr.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c > index 05f4099..709711a 100644 > --- a/arch/arm/mach-zynq/slcr.c > +++ b/arch/arm/mach-zynq/slcr.c > @@ -166,6 +166,11 @@ u32 zynq_slcr_get_boot_mode(void) > return readl(&slcr_base->boot_mode); > } > > +u32 zynq_slcr_get_reboot_status(void) > +{ > + return readl(&slcr_base->reboot_status); > +} > + > u32 zynq_slcr_get_idcode(void) > { > return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >> > Isn't this generating sparse warning if it is not used and declared? Thanks, Michal