From: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCHv4 0/9] Migrate NXP/Freescale Vybrid based boards to support pure DT
Date: Tue, 2 Feb 2016 16:06:16 +0530 [thread overview]
Message-ID: <56B086A0.2010506@toradex.com> (raw)
In-Reply-To: <1453870913-12028-1-git-send-email-bhuvanchandra.dv@toradex.com>
Ping!
On 01/27/2016 10:31 AM, Bhuvanchandra DV wrote:
> Changes since v3:
> - Add missing space in device tree.
> - Reorder the patchset to avoid broken state.
>
> Changes since v2:
> - Split the patch for updating the license string.
> - Reorder the patchset to avoid broken state.
>
> Changes since v1:
> - Update the license string in device tree's.
> - Update all lpuart's uart nodes in device tree.
> - Dropped *_dtb_defconfig and updated the default defconfig's with DT support.
> - Reordered defconfig's using defconfig via savedefconfig.
> - Use one patch to update all Vybrid based board defconfig's.
> - Dropped vybrid_gpio driver legacy code. Thanks! Stefan for pointing this.
> - Dropped the legacy way of enabling GPIO, UART and SPI on NXP/Freescale Vybrid
> based board's.
>
> - Compile checked for vf610twr and pcm052 since I don't have access
> to such hardware at my end. Reviewer's and tester's welcome!
>
> Bhuvanchandra DV (9):
> arm: vybrid: Enable lpuart support
> arm: vybrid: Update the license string
> arm: colibri-vf: Enable serial support
> arm: vf610-twr: Add device tree file's
> arm: pcm052: Add device tree file's
> arm: vybrid: Update defconfig's
> arm: vybrid: Drop enabling GPIO, SPI and UART in legacy mode
> dm: lpuart: Drop the legacy code
> dm: vybrid_gpio: Drop legacy code
>
> arch/arm/dts/Makefile | 4 +-
> arch/arm/dts/pcm052.dts | 22 +++++++++
> arch/arm/dts/vf-colibri.dtsi | 15 ++++--
> arch/arm/dts/vf.dtsi | 48 +++++++++++++++++--
> arch/arm/dts/vf500-colibri.dts | 5 --
> arch/arm/dts/vf610-colibri.dts | 5 --
> arch/arm/dts/vf610-twr.dts | 22 +++++++++
> configs/colibri_vf_defconfig | 8 ++++
> configs/colibri_vf_dtb_defconfig | 14 ------
> configs/pcm052_defconfig | 7 +++
> configs/vf610twr_defconfig | 7 +++
> configs/vf610twr_nand_defconfig | 7 +++
> drivers/gpio/vybrid_gpio.c | 18 -------
> drivers/serial/serial_lpuart.c | 101 +--------------------------------------
> include/configs/colibri_vf.h | 13 -----
> include/configs/pcm052.h | 3 --
> include/configs/vf610twr.h | 3 --
> 17 files changed, 131 insertions(+), 171 deletions(-)
> create mode 100644 arch/arm/dts/pcm052.dts
> create mode 100644 arch/arm/dts/vf610-twr.dts
> delete mode 100644 configs/colibri_vf_dtb_defconfig
>
--
Best regards,
Bhuvan
next prev parent reply other threads:[~2016-02-02 10:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-27 5:01 [U-Boot] [PATCHv4 0/9] Migrate NXP/Freescale Vybrid based boards to support pure DT Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 1/9] arm: vybrid: Enable lpuart support Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 2/9] arm: vybrid: Update the license string Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 3/9] arm: colibri-vf: Enable serial support Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 4/9] arm: vf610-twr: Add device tree file's Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 5/9] arm: pcm052: " Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 6/9] arm: vybrid: Update defconfig's Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 7/9] arm: vybrid: Drop enabling GPIO, SPI and UART in legacy mode Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 8/9] dm: lpuart: Drop the legacy code Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 9/9] dm: vybrid_gpio: Drop " Bhuvanchandra DV
2016-02-02 10:36 ` Bhuvanchandra DV [this message]
2016-02-02 20:37 ` [U-Boot] [PATCHv4 0/9] Migrate NXP/Freescale Vybrid based boards to support pure DT Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56B086A0.2010506@toradex.com \
--to=bhuvanchandra.dv@toradex.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox