[U-Boot] [PATCH] arm: at91: Add support for DENX MA5D4 SoM and EVK

[Heiko Schocher <hs@denx.de>]

Hello Marek,

added Andreas to cc as he is the at91 custodian.

Am 10.02.2016 um 22:41 schrieb Marek Vasut:
> Add support for DENX MA5D4 SoM and MA5D4EVK board, based on the
> Atmel SAMA5D4 SoC. The SoM contains the SoC, eMMC, SPI NOR, SPI
> CAN controllers and DRAM, the baseboard contains UART connectors,
> ethernet port, microSD slot, LCD header, 2x CAN connector and a
> lot of expansion headers.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Andreas Bie?mann <andreas.devel@googlemail.com>
> ---
>   arch/arm/mach-at91/Kconfig      |   6 +
>   board/denx/ma5d4evk/Kconfig     |  12 ++
>   board/denx/ma5d4evk/MAINTAINERS |   6 +
>   board/denx/ma5d4evk/Makefile    |   7 +
>   board/denx/ma5d4evk/ma5d4evk.c  | 417 ++++++++++++++++++++++++++++++++++++++++
>   configs/ma5d4evk_defconfig      |  11 ++
>   include/configs/ma5d4evk.h      | 255 ++++++++++++++++++++++++
>   7 files changed, 714 insertions(+)
>   create mode 100644 board/denx/ma5d4evk/Kconfig
>   create mode 100644 board/denx/ma5d4evk/MAINTAINERS
>   create mode 100644 board/denx/ma5d4evk/Makefile
>   create mode 100644 board/denx/ma5d4evk/ma5d4evk.c
>   create mode 100644 configs/ma5d4evk_defconfig
>   create mode 100644 include/configs/ma5d4evk.h

just some nitpick ;-)

[...]
> diff --git a/board/denx/ma5d4evk/ma5d4evk.c b/board/denx/ma5d4evk/ma5d4evk.c
> new file mode 100644
> index 0000000..d1a550e
> --- /dev/null
> +++ b/board/denx/ma5d4evk/ma5d4evk.c
> @@ -0,0 +1,417 @@
> +/*
> + * Copyright (C) 2015 Marek Vasut <marex@denx.de>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/at91_common.h>
> +#include <asm/arch/at91_pmc.h>
> +#include <asm/arch/at91_rstc.h>
> +#include <asm/arch/atmel_mpddrc.h>
> +#include <asm/arch/atmel_usba_udc.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/arch/clk.h>
> +#include <asm/arch/sama5d3_smc.h>
> +#include <asm/arch/sama5d4.h>
> +#include <atmel_hlcdc.h>
> +#include <atmel_mci.h>
> +#include <lcd.h>
> +#include <mmc.h>
> +#include <net.h>
> +#include <netdev.h>
> +#include <spi.h>
> +#include <version.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/*
> + * re h ; load 0x200000 ma5d4evk/u-boot-spl.bin BIN ; go 0x200000
> + * h ; load 0x26f00000 ma5d4evk/u-boot.bin BIN ; go 0x26f00000
> + */

;-) Maybe a comment that this are the magic commands in the BDI
for starting the generated images would be helpful.

And plan is to switch to CONFIG_DM for all boards (I know, I did not
started with this job for "my" boards ...)... do you have plans/time
for switching (or may you use it already and i just overseen it)?

Beside of this:
Reviewed-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany