From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Thu, 11 Feb 2016 16:49:41 +0100 Subject: [U-Boot] [PATCH] arm: socfpga: Enable ethernet PHY configuration to RGMII again In-Reply-To: <1455205513-21646-1-git-send-email-sr@denx.de> References: <1455205513-21646-1-git-send-email-sr@denx.de> Message-ID: <56BCAD95.3030603@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 02/11/2016 04:45 PM, Stefan Roese wrote: > With commit c32a6fd0 [net: Don't call board/cpu_eth_init() with driver > model], cpu_eth_init() is not called on SoCFPGA any more. Since this > function configures the internal PHY interface to RGMII (via the physel_X > bits), its still needed. So lets rename this function and call it in > arch_early_init_r(). > > Tested on socfpga_sr1500. > > Signed-off-by: Stefan Roese > Cc: Simon Glass > Cc: Dinh Nguyen > Cc: Marek Vasut > --- > arch/arm/mach-socfpga/misc.c | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c > index 9b43b92..2b1cd4a 100644 > --- a/arch/arm/mach-socfpga/misc.c > +++ b/arch/arm/mach-socfpga/misc.c > @@ -104,7 +104,7 @@ static void dwmac_deassert_reset(const unsigned int of_reset_id) > socfpga_per_reset(reset, 0); > } I just sent and applied very similar patch, can you try u-boot-socfpga/master and see if it works for you? Thanks!