From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stuart Longland Date: Tue, 16 Feb 2016 22:38:41 +1000 Subject: [U-Boot] i.MX286 U-Boot fails with code HTLLCL0x8050100b In-Reply-To: <56C14F6A.9060406@vrt.com.au> References: <56BC1D77.601@vrt.com.au> <56C14F6A.9060406@vrt.com.au> Message-ID: <56C31851.6080302@vrt.com.au> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 15/02/16 14:09, Stuart Longland wrote: > I ask again: Is there somewhere else I should be looking for the cause > of the above issue? Well, found my issue in the end I think. In exasperation I dd'ed one of my working SD card images, proved that the machine booted, then dd'ed the newly build U-Boot image over the top of the old U-Boot partition. It worked. So I'll put this down to the i.MX286 boot ROM being *exceptionally* picky about partition placement. If things aren't *exactly* right, it'll flatly refuse to work. I might see if I can reproduce the bad image and hex-dump it to better understand what was "wrong". -- Stuart Longland Systems Engineer _ ___ \ /|_) | T: +61 7 3535 9619 \/ | \ | 38b Douglas Street F: +61 7 3535 9699 SYSTEMS Milton QLD 4064 http://www.vrt.com.au