From mboxrd@z Thu Jan  1 00:00:00 1970
From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 16 Feb 2016 17:04:11 +0100
Subject: [U-Boot] test/py main_signon
In-Reply-To: <56C324F8.6090106@denx.de>
References: <56C3121E.7060406@xilinx.com> <56C324F8.6090106@denx.de>
Message-ID: <56C3487B.5070802@xilinx.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Heiko,

On 16.2.2016 14:32, Heiko Schocher wrote:
> Hello Michal,
> 
> Am 16.02.2016 um 13:12 schrieb Michal Simek:
>> Hi Stephen,
>>
>> trying to run the latest testing on zynq board and getting this
>> main_signon error.
>>
>> This is what I am running
>> ./test/py/test.py --bd zynq_zc702  --build --board-identity zc702
>> and getting below.
> 
> Does this board has SPL support without SPL serial output?

I do load u-boot via jtag that's why SPL logs are not visible.

> If so, can you try my patch:
> http://patchwork.ozlabs.org/patch/583348/

I have applied your patch but it is still not working.

If I run full flow with SPL then I can't see any issue.

Thanks,
Michal