From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Sun, 21 Feb 2016 11:16:56 +0100 Subject: [U-Boot] [PATCH 1/2] arm: mx6: Add UART8 base address for i.MX6UL In-Reply-To: <1455100886-21291-1-git-send-email-sr@denx.de> References: <1455100886-21291-1-git-send-email-sr@denx.de> Message-ID: <56C98E98.5060603@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 10/02/2016 11:41, Stefan Roese wrote: > Add the base address for the i.MX6UL so that this UART can be used. > > Signed-off-by: Stefan Roese > Cc: Ye Li > Cc: Fabio Estevam > Cc: Stefano Babic > --- > arch/arm/include/asm/arch-mx6/imx-regs.h | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h > index 5c45bf6..d0e6bf2 100644 > --- a/arch/arm/include/asm/arch-mx6/imx-regs.h > +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h > @@ -162,6 +162,7 @@ > #endif > #define UART1_BASE (ATZ1_BASE_ADDR + 0x20000) > #define ESAI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000) > +#define UART8_BASE (ATZ1_BASE_ADDR + 0x24000) > #define SSI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x28000) > #define SSI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000) > #define SSI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000) > Reviewed-by : Stefano Babic Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================