[U-Boot] [PATCH v3 3/3] board:freescale:usb: Add device-tree fixup support for xhci controller

[Marek Vasut <marex@denx.de>]

On 03/01/2016 08:03 AM, Sriram Dash wrote:
> Enables usb device-tree fixup code to incorporate xhci controller
> 
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com>
> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>

Changelog ?

> ---
>  board/freescale/common/Makefile |  1 +
>  board/freescale/common/usb.c    | 30 +++++++++++++-----------------
>  include/fdt_support.h           |  4 ++--
>  3 files changed, 16 insertions(+), 19 deletions(-)
> 
> diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
> index 62de45c..c644896 100644
> --- a/board/freescale/common/Makefile
> +++ b/board/freescale/common/Makefile
> @@ -14,6 +14,7 @@ endif
>  endif
>  
>  obj-$(CONFIG_USB_EHCI_FSL) += usb.o
> +obj-$(CONFIG_USB_XHCI_FSL) += usb.o
>  
>  ifdef MINIMAL
>  # necessary to create built-in.o
> diff --git a/board/freescale/common/usb.c b/board/freescale/common/usb.c
> index d815dc1..8e423be 100644
> --- a/board/freescale/common/usb.c
> +++ b/board/freescale/common/usb.c
> @@ -18,29 +18,25 @@
>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
>  #endif
>  
> +const char compat_usb_fsl[][16] = {"fsl-usb2-mph",
> +				   "fsl-usb2-dr",
> +				   "snps,dwc3"};

This is const char *foo[].

>  static const char *fdt_usb_get_node_type(void *blob, int start_offset,
>  					 int *node_offset)
>  {
> -	const char *compat_dr = "fsl-usb2-dr";
> -	const char *compat_mph = "fsl-usb2-mph";
>  	const char *node_type = NULL;
> -
> -	*node_offset = fdt_node_offset_by_compatible(blob, start_offset,
> -						     compat_mph);
> -	if (*node_offset < 0) {
> -		*node_offset = fdt_node_offset_by_compatible(blob,
> -							     start_offset,
> -							     compat_dr);
> -		if (*node_offset < 0) {
> -			printf("ERROR: could not find compatible node: %s\n",
> -			       fdt_strerror(*node_offset));
> -		} else {
> -			node_type = compat_dr;
> +	int size = sizeof(compat_usb_fsl)/sizeof(compat_usb_fsl[0]);

Oh the art of counting. Firstly, what you did here is reimplementation
of ARRAY_SIZE(), but that's wrong in this context. Each one of the array
elements is differently sized, so to avoid problems with this crap, the
code hard-codes random constant defining the element size, which is
another crap workaround as it will break once a longer element is added.
And it wastes space. No, instead, use a terminating entry in
the array.

btw use checkpatch before your next submission.

> +	int i;
> +
> +	for (i = 0; i < size ; i++) {
> +		*node_offset = fdt_node_offset_by_compatible
> +				(blob, start_offset, compat_usb_fsl[i]);
> +		if (*node_offset >= 0) {
> +			node_type = compat_usb_fsl[i];
> +			break;
>  		}
> -	} else {
> -		node_type = compat_mph;
>  	}
> -
>  	return node_type;
>  }
>  
> diff --git a/include/fdt_support.h b/include/fdt_support.h
> index 296add0..d34e959 100644
> --- a/include/fdt_support.h
> +++ b/include/fdt_support.h
> @@ -113,11 +113,11 @@ void fdt_fixup_qe_firmware(void *fdt);
>   */
>  int fdt_fixup_display(void *blob, const char *path, const char *display);
>  
> -#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
> +#if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL)
>  void fdt_fixup_dr_usb(void *blob, bd_t *bd);
>  #else
>  static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
> -#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
> +#endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */
>  
>  #if defined(CONFIG_SYS_FSL_SEC_COMPAT)
>  void fdt_fixup_crypto_node(void *blob, int sec_rev);
> 


-- 
Best regards,
Marek Vasut