From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Newbie SPL question for socfpga_sockit
Date: Thu, 03 Mar 2016 10:48:09 +0100 [thread overview]
Message-ID: <56D80859.4080208@denx.de> (raw)
In-Reply-To: <CAMcKmiHR7dfrH__Y70wV93rGa2t1n4Gzu8v2fvgPOiTgPkw8fg@mail.gmail.com>
On 03/03/2016 07:55 AM, George Broz wrote:
> On 2 March 2016 at 14:54, Dinh Nguyen <dinguyen@opensource.altera.com> wrote:
>
>>> socfpga_common.h and re-built the project. I picked up
>>> spl/u-boot-spl-dtb.sfp and
>>> u-boot-dtb.img and transferred them to the SD card with:
>>>
>>> dd if=u-boot-spl-dtb.sfp of=/dev/sdf3 bs=64k seek=0
>>> dd if=u-boot-dtb.img of=/dev/sdf3 bs=64k seek=4
>>>
>>
>> You can just do a 'make u-boot-with-spl.sfp' and burn the
>> u-boot-with-spl.sfp file straight to the a2 partition, or sdf3.
>>
> Thanks, Dinh. That's a time saver.
>
> On my version that target is: 'make u-boot-with-spl-dtb.sfp'
This was changed after 2016.01 was out by the following patch:
commit bd7dc3883bf4e61538e5519ca2d6798b3e8e0695
Author: Simon Glass <sjg@chromium.org>
Date: Sun Jan 31 18:10:53 2016 -0700
socfpga: Simplify Makefile filenames
--
Best regards,
Marek Vasut
prev parent reply other threads:[~2016-03-03 9:48 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-17 21:54 [U-Boot] Newbie SPL question for socfpga_sockit George Broz
2016-02-18 2:45 ` Phil Reid
2016-03-02 2:40 ` George Broz
2016-03-02 3:49 ` Phil Reid
2016-03-03 6:49 ` George Broz
2016-03-03 7:11 ` Phil Reid
2016-03-03 14:57 ` George Broz
2016-03-09 1:42 ` Phil Reid
2016-03-09 10:55 ` Marek Vasut
2016-03-09 16:06 ` George Broz
2016-03-16 1:29 ` George Broz
2016-03-16 16:17 ` George Broz
2016-03-17 1:35 ` Marek Vasut
2016-03-18 18:59 ` George Broz
2016-03-18 19:32 ` Marek Vasut
2016-03-18 21:22 ` George Broz
2016-03-19 11:10 ` Phil Reid
2016-03-20 16:44 ` Marek Vasut
2016-03-20 16:49 ` Marek Vasut
2016-03-29 1:56 ` George Broz
2016-03-29 17:46 ` Marek Vasut
2016-03-20 15:55 ` Dinh Nguyen
2016-03-20 16:42 ` Marek Vasut
2016-03-22 17:06 ` Dinh Nguyen
2016-03-26 20:52 ` Marek Vasut
2016-04-05 8:33 ` Phil Reid
2016-04-05 22:03 ` Marek Vasut
2016-04-06 0:31 ` George Broz
2016-04-06 0:45 ` Marek Vasut
2016-04-06 1:17 ` George Broz
2016-04-06 10:43 ` Marek Vasut
2016-04-07 1:42 ` George Broz
2016-04-07 2:05 ` Marek Vasut
2016-04-07 13:14 ` George Broz
2016-04-07 20:39 ` Marek Vasut
2016-04-07 23:31 ` George Broz
2016-04-07 23:36 ` Marek Vasut
2016-04-07 23:51 ` George Broz
2016-04-08 5:16 ` Stefan Roese
2016-04-08 12:36 ` Marek Vasut
2016-04-08 22:40 ` George Broz
2016-04-10 17:47 ` Marek Vasut
2016-04-11 2:03 ` George Broz
2016-04-11 14:02 ` Marek Vasut
2016-04-12 15:53 ` Dinh Nguyen
2016-04-12 16:00 ` Marek Vasut
2016-04-12 16:08 ` Dinh Nguyen
2016-04-12 16:11 ` Marek Vasut
2016-04-13 9:25 ` Chin Liang See
2016-04-12 16:09 ` Stefan Roese
2016-04-13 11:09 ` Marek Vasut
2016-04-06 7:00 ` Phil Reid
2016-04-06 11:51 ` Marek Vasut
2016-04-06 15:04 ` Phil Reid
2016-04-06 20:38 ` Marek Vasut
2016-03-29 1:44 ` George Broz
2016-03-29 17:45 ` Marek Vasut
2016-03-03 21:16 ` George Broz
2016-03-02 22:54 ` Dinh Nguyen
2016-03-02 23:04 ` Marek Vasut
2016-03-02 23:08 ` Dinh Nguyen
2016-03-02 23:24 ` Marek Vasut
2016-03-03 14:48 ` Dinh Nguyen
2016-03-03 14:51 ` Marek Vasut
2016-03-03 22:00 ` George Broz
2016-03-03 22:09 ` Marek Vasut
[not found] ` <CAMcKmiG8OMmbZ262n8gL7eM=WAgaakaZ5rWzCC1vYu7yzGBYAA@mail.gmail.com>
[not found] ` <56D8BDD7.8070604@denx.de>
[not found] ` <CAMcKmiGrZ94sZKY85Y3aC1_fwgV8oJeAJ0O71bY=gMxUGBp=FQ@mail.gmail.com>
[not found] ` <56D8C3A0.9020204@denx.de>
2016-03-03 23:46 ` George Broz
2016-03-04 16:52 ` Dinh Nguyen
2016-03-04 16:06 ` Dinh Nguyen
2016-03-04 19:03 ` Marek Vasut
2016-03-21 14:05 ` Chin Liang See
2016-03-21 15:45 ` Chin Liang See
2016-03-23 15:00 ` Chin Liang See
2016-03-23 15:37 ` [U-Boot] SoCFPGA cache / S-bit problem - was " Stefan Roese
2016-04-06 16:35 ` Dinh Nguyen
2016-04-06 16:46 ` Marek Vasut
2016-04-06 16:51 ` Dinh Nguyen
2016-03-03 6:55 ` [U-Boot] " George Broz
2016-03-03 9:48 ` Marek Vasut [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D80859.4080208@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox