public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] usb: dwc2: disable erroneous overcurrent condition
Date: Sat, 05 Mar 2016 00:12:53 +0100	[thread overview]
Message-ID: <56DA1675.9040904@denx.de> (raw)
In-Reply-To: <1457125525-14091-1-git-send-email-dinguyen@opensource.altera.com>

On 03/04/2016 10:05 PM, dinguyen at opensource.altera.com wrote:
> From: Dinh Nguyen <dinguyen@opensource.altera.com>
> 
> For the case where an external VBUS is used, we should enable the external
> VBUS comparator in the driver. This would prevent an unnecessary overcurrent
> error which would then disable the host port.
> 
> The overcurrent condition was happening on the SoCFPGA Cyclone5 devkit, thus
> USB was not working on the devkit. This patch fixes that problem.
> 
> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
> ---
>  drivers/usb/host/dwc2.c |    2 ++
>  drivers/usb/host/dwc2.h |    2 ++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
> index c6727c3..d9a8d2d 100644
> --- a/drivers/usb/host/dwc2.c
> +++ b/drivers/usb/host/dwc2.c
> @@ -264,6 +264,8 @@ static void dwc_otg_core_init(struct dwc2_core_regs *regs)
>  	/* Program the ULPI External VBUS bit if needed */
>  #ifdef CONFIG_DWC2_PHY_ULPI_EXT_VBUS
>  	usbcfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
> +	usbcfg |= (DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR |
> +		   DWC2_GUSBCFG_INDICATOR_PASSTHROUGH);

Well why don't you wrap it into the previous usbcfg |= , one line above?

Can you send a V2 real quick or shall I fix it ?/

>  #else
>  	usbcfg &= ~DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
>  #endif
> diff --git a/drivers/usb/host/dwc2.h b/drivers/usb/host/dwc2.h
> index 594757b..4482dc6 100644
> --- a/drivers/usb/host/dwc2.h
> +++ b/drivers/usb/host/dwc2.h
> @@ -152,6 +152,8 @@ struct dwc2_core_regs {
>  #define DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR_OFFSET	21
>  #define DWC2_GUSBCFG_TERM_SEL_DL_PULSE			(1 << 22)
>  #define DWC2_GUSBCFG_TERM_SEL_DL_PULSE_OFFSET		22
> +#define DWC2_GUSBCFG_INDICATOR_PASSTHROUGH		(1 << 24)
> +#define DWC2_GUSBCFG_INDICATOR_PASSTHROUGH_OFFSET	24
>  #define DWC2_GUSBCFG_IC_USB_CAP				(1 << 26)
>  #define DWC2_GUSBCFG_IC_USB_CAP_OFFSET			26
>  #define DWC2_GUSBCFG_IC_TRAFFIC_PULL_REMOVE		(1 << 27)
> 


-- 
Best regards,
Marek Vasut

      reply	other threads:[~2016-03-04 23:12 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-04 21:05 [U-Boot] usb: dwc2: disable erroneous overcurrent condition dinguyen at opensource.altera.com
2016-03-04 23:12 ` Marek Vasut [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56DA1675.9040904@denx.de \
    --to=marex@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox