From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Wed, 9 Mar 2016 09:35:12 +0100 Subject: [U-Boot] [PATCH v2] arm: imx: Add support for GE Bx50v3 boards In-Reply-To: <56DF56C0.1080608@timesys.com> References: <1454098601-1614-1-git-send-email-akshay.bhat@timesys.com> <20160130040658.GA4528@linux-7smt.suse> <56DF56C0.1080608@timesys.com> Message-ID: <56DFE040.5030605@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Akshay, On 08/03/2016 23:48, Akshay Bhat wrote: > Hi Stefano, > > On 01/29/2016 11:07 PM, Peng Fan wrote: >> Hi Akshay, >> >> On Fri, Jan 29, 2016 at 03:16:40PM -0500, Akshay Bhat wrote: >>> Add support for GE B450v3, B650v3 and B850v3 boards. The boards >>> are based on Advantech BA16 module which has a i.MX6D processor. >>> The boards support: >>> - FEC Ethernet >>> - USB Ports >>> - SDHC and MMC boot >>> - SPI NOR >>> - LVDS and HDMI display >>> >>> Basic information about the module: >>> - Module manufacturer: Advantech >>> - CPU: Freescale ARM Cortex-A9 i.MX6D >>> - SPECS: >>> Up to 2GB Onboard DDR3 Memory; >>> Up to 16GB Onboard eMMC NAND Flash >>> Supports OpenGL ES 2.0 and OpenVG 1.1 >>> HDMI, 24-bit LVDS >>> 1x UART, 2x I2C, 8x GPIO, >>> 4x Host USB 2.0 port, 1x USB OTG port, >>> 1x micro SD (SDHC),1x SDIO, 1x SATA II, >>> 1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2 >>> >>> Signed-off-by: Akshay Bhat >> >> >> Reviewed-by: Peng Fan >> >> Regards, >> Peng. >> > > If there are no further review comments, can this patch be applied in > the next merge window (for v2016.05)? > Yes, I will do it. > Also I have couple updates to the bx50v3.c file. Should I wait for this > patch to be applied before sending a new patch with the changes (wasn't > sure if you had a -next branch where the v2 patch was already applied)? > Tom has proposed several times to the custodian to have a -next branch, and making it really working. I admit I have not done enough for that, and it is something I can improve. I will prepare a "working" -next, to be merged into master after release. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================