From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/6] usb: legacy_hub_port_reset(): Speedup hub reset handling
Date: Thu, 10 Mar 2016 19:51:13 +0100 [thread overview]
Message-ID: <56E1C221.3030403@redhat.com> (raw)
In-Reply-To: <1457625012-1268-2-git-send-email-sr@denx.de>
Hi,
On 10-03-16 16:50, Stefan Roese wrote:
> Start with a short USB hub reset delay of 10ms. This can be enough for
> some configurations.
>
> The 2nd delay at the of the loop is completely removed. Since the delay
> hasn't been long enough, a longer delay time of 200ms is assigned. And
> will be used in the next loop round.
>
> This hub reset handling is also used in the v4.4 Linux USB driver,
> hub_port_reset().
>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Cc: Stephen Warren <swarren@nvidia.com>
> Cc: Marek Vasut <marex@denx.de>
Since this is good enough for the kernel it should be good enough for us:
Acked-by: Hans de Goede <hdegoede@redhat.com>
Regards,
Hans
> ---
>
> common/usb_hub.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/common/usb_hub.c b/common/usb_hub.c
> index e1de813..10fdd3c 100644
> --- a/common/usb_hub.c
> +++ b/common/usb_hub.c
> @@ -46,6 +46,9 @@ DECLARE_GLOBAL_DATA_PTR;
>
> #define USB_BUFSIZ 512
>
> +#define HUB_SHORT_RESET_TIME 10
> +#define HUB_LONG_RESET_TIME 200
> +
> /* TODO(sjg at chromium.org): Remove this when CONFIG_DM_USB is defined */
> static struct usb_hub_device hub_dev[USB_MAX_HUB];
> static int usb_hub_index;
> @@ -164,6 +167,7 @@ int legacy_hub_port_reset(struct usb_device *dev, int port,
> int err, tries;
> ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
> unsigned short portstatus, portchange;
> + int delay = HUB_SHORT_RESET_TIME; /* start with short reset delay */
>
> #ifdef CONFIG_DM_USB
> debug("%s: resetting '%s' port %d...\n", __func__, dev->dev->name,
> @@ -176,7 +180,7 @@ int legacy_hub_port_reset(struct usb_device *dev, int port,
> if (err < 0)
> return err;
>
> - mdelay(200);
> + mdelay(delay);
>
> if (usb_get_port_status(dev, port + 1, portsts) < 0) {
> debug("get_port_status failed status %lX\n",
> @@ -215,7 +219,8 @@ int legacy_hub_port_reset(struct usb_device *dev, int port,
> if (portstatus & USB_PORT_STAT_ENABLE)
> break;
>
> - mdelay(200);
> + /* Switch to long reset delay for the next round */
> + delay = HUB_LONG_RESET_TIME;
> }
>
> if (tries == MAX_TRIES) {
>
next prev parent reply other threads:[~2016-03-10 18:51 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-10 15:50 [U-Boot] [PATCH 0/6] usb: Reduce USB scanning time Stefan Roese
2016-03-10 15:50 ` [U-Boot] [PATCH 1/6] usb: legacy_hub_port_reset(): Speedup hub reset handling Stefan Roese
2016-03-10 18:51 ` Hans de Goede [this message]
2016-03-11 6:37 ` Stefan Roese
2016-03-11 0:06 ` Stephen Warren
2016-03-10 15:50 ` [U-Boot] [PATCH 2/6] usb: Remove 200 ms delay in usb_hub_port_connect_change() Stefan Roese
2016-03-10 18:55 ` Hans de Goede
2016-03-11 6:34 ` Stefan Roese
2016-03-11 6:35 ` Stefan Roese
2016-03-11 0:06 ` Stephen Warren
2016-03-10 15:50 ` [U-Boot] [PATCH 3/6] usb: Remove 1 second per port timeout in usb_hub_configure() Stefan Roese
2016-03-10 18:59 ` Hans de Goede
2016-03-10 15:50 ` [U-Boot] [PATCH 4/6] usb: usb_hub_power_on(): Use 100ms power-on delay instead of 1 sec (optionally) Stefan Roese
2016-03-10 19:12 ` Hans de Goede
2016-03-11 9:05 ` Stefan Roese
2016-03-11 10:13 ` Stefan Roese
2016-03-11 10:32 ` Hans de Goede
2016-03-11 10:42 ` Stefan Roese
2016-03-10 15:50 ` [U-Boot] [PATCH 5/6] usb: Don't reset the USB hub a 2nd time Stefan Roese
2016-03-10 19:13 ` Hans de Goede
2016-03-11 6:43 ` Stefan Roese
2016-03-11 0:07 ` Stephen Warren
2016-03-10 15:50 ` [U-Boot] [PATCH 6/6] usb: Implement static USB port configuration to speed up USB scanning Stefan Roese
2016-03-10 19:18 ` Hans de Goede
2016-03-11 15:08 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56E1C221.3030403@redhat.com \
--to=hdegoede@redhat.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox