From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 5/6] usb: Don't reset the USB hub a 2nd time
Date: Thu, 10 Mar 2016 20:13:25 +0100 [thread overview]
Message-ID: <56E1C755.70405@redhat.com> (raw)
In-Reply-To: <1457625012-1268-6-git-send-email-sr@denx.de>
Hi,
On 10-03-16 16:50, Stefan Roese wrote:
> Debugging has shown, that all USB hubs are being resetted twice while
> USB scanning. This introduces additional delays and makes USB scanning
> even more slow. Testing has shown that this 2nd USB hub reset doesn't
> seem to be necessary.
>
> This patch now removes this 2nd USB hub reset if CONFIG_USB_FAST_SCAN
> is defined. Resulting in faster USB scan time. Here the current
> number:
>
> Without this patch:
> => time usb start
> starting USB...
> USB0: USB EHCI 1.00
> scanning bus 0 for devices... 9 USB Device(s) found
>
> time: 6.319 seconds
>
> With this patch:
> => time usb start
> starting USB...
> USB0: USB EHCI 1.00
> scanning bus 0 for devices... 9 USB Device(s) found
>
> time: 3.777 seconds
>
> So ~2.5 seconds of USB scanning time reduction.
>
> Again, this 2nd reset is only removed if CONFIG_USB_FAST_SCAN is
> defined. Once more tests are done on multiple other platforms we
> can decide to remove this 2nd reset completely.
I see no reason to make the removal conditional, I believe that
this is some relic workaround for likely long fixed bugs and
we should just remove it completely (for v2016.07).
Regards,
Hans
>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Cc: Stephen Warren <swarren@nvidia.com>
> Cc: Marek Vasut <marex@denx.de>
> ---
>
> common/usb.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/common/usb.c b/common/usb.c
> index c7b8b0e..b96a2f6 100644
> --- a/common/usb.c
> +++ b/common/usb.c
> @@ -920,6 +920,11 @@ __weak int usb_alloc_device(struct usb_device *udev)
> static int usb_hub_port_reset(struct usb_device *dev, struct usb_device *hub)
> {
> if (hub) {
> +#if !defined(CONFIG_USB_FAST_SCAN)
> + /*
> + * Is this 2nd hub port reset necessary? The port has already
> + * been reset in usb_hub_port_connect_change() before.
> + */
> unsigned short portstatus;
> int err;
>
> @@ -929,6 +934,7 @@ static int usb_hub_port_reset(struct usb_device *dev, struct usb_device *hub)
> printf("\n Couldn't reset port %i\n", dev->portnr);
> return err;
> }
> +#endif
> } else {
> usb_reset_root_port(dev);
> }
>
next prev parent reply other threads:[~2016-03-10 19:13 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-10 15:50 [U-Boot] [PATCH 0/6] usb: Reduce USB scanning time Stefan Roese
2016-03-10 15:50 ` [U-Boot] [PATCH 1/6] usb: legacy_hub_port_reset(): Speedup hub reset handling Stefan Roese
2016-03-10 18:51 ` Hans de Goede
2016-03-11 6:37 ` Stefan Roese
2016-03-11 0:06 ` Stephen Warren
2016-03-10 15:50 ` [U-Boot] [PATCH 2/6] usb: Remove 200 ms delay in usb_hub_port_connect_change() Stefan Roese
2016-03-10 18:55 ` Hans de Goede
2016-03-11 6:34 ` Stefan Roese
2016-03-11 6:35 ` Stefan Roese
2016-03-11 0:06 ` Stephen Warren
2016-03-10 15:50 ` [U-Boot] [PATCH 3/6] usb: Remove 1 second per port timeout in usb_hub_configure() Stefan Roese
2016-03-10 18:59 ` Hans de Goede
2016-03-10 15:50 ` [U-Boot] [PATCH 4/6] usb: usb_hub_power_on(): Use 100ms power-on delay instead of 1 sec (optionally) Stefan Roese
2016-03-10 19:12 ` Hans de Goede
2016-03-11 9:05 ` Stefan Roese
2016-03-11 10:13 ` Stefan Roese
2016-03-11 10:32 ` Hans de Goede
2016-03-11 10:42 ` Stefan Roese
2016-03-10 15:50 ` [U-Boot] [PATCH 5/6] usb: Don't reset the USB hub a 2nd time Stefan Roese
2016-03-10 19:13 ` Hans de Goede [this message]
2016-03-11 6:43 ` Stefan Roese
2016-03-11 0:07 ` Stephen Warren
2016-03-10 15:50 ` [U-Boot] [PATCH 6/6] usb: Implement static USB port configuration to speed up USB scanning Stefan Roese
2016-03-10 19:18 ` Hans de Goede
2016-03-11 15:08 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56E1C755.70405@redhat.com \
--to=hdegoede@redhat.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox