[U-Boot] [PATCH] ti_armv7_common: env: Add NFS loading support to default enviroment

[Nishanth Menon <nm@ti.com>]

On 03/11/2016 02:29 PM, Andrew F. Davis wrote:
> On 03/11/2016 09:38 AM, Andrew F. Davis wrote:
>> NFS loading is similar to net loading except initial files are loaded
>> over NFS instead of TFTP, this removes the need for multiple different
>> protocol servers running on the host and allows the use of a single
>> network file system containing boot related files in their usual
>> in-filesystem directory. Add defaults for this boot style here.
>>
>> Signed-off-by: Andrew F. Davis <afd@ti.com>
>> ---
>>  include/configs/ti_armv7_keystone2.h | 7 +++++++
>>  1 file changed, 7 insertions(+)
>>
>> diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
>> index a7206f4..1c6997a 100644
>> --- a/include/configs/ti_armv7_keystone2.h
>> +++ b/include/configs/ti_armv7_keystone2.h
>> @@ -213,6 +213,7 @@
>>  #define CONFIG_CMD_SF
>>  #define CONFIG_CMD_EEPROM
>>  #define CONFIG_CMD_USB
>> +#define CONFIG_CMD_NFS

This should not be here.
In file included from include/configs/k2g_evm.h:36:0,
                 from include/config.h:5,
                 from include/common.h:18,
                 from include/ubi_uboot.h:17,
                 from drivers/mtd/ubi/attach.c:85:
include/configs/ti_armv7_keystone2.h:216:0: warning: "CONFIG_CMD_NFS"
redefined
 #define CONFIG_CMD_NFS

Instead, it should be defined in the k2*_evm_defconfig files if the
default was 'n'... but..
cmd/Kconfig defines CMD_NFS as y.

So, all we have to do is drop the CONFIG_CMD_NFS from the header.

We can already see that when folks wanted to disable NFS
$ git grep CMD_NFS configs/|grep "is not set"
enable:
$ git grep CMD_NFS configs/|grep -v "is not set"

it might actually be nicer.. for the actual env variables to
eventually get into include/config_distro_bootcmd.h perhaps? I dont
know about that atm..
-- 
Regards,
Nishanth Menon