* [U-Boot] [PATCH v3] spl: arm: Make sure to include u_boot_list_*_part_disk_*
@ 2016-03-16 1:05 Tom Rini
2016-03-16 1:16 ` Tom Rini
2016-03-16 1:18 ` Michal Simek
0 siblings, 2 replies; 3+ messages in thread
From: Tom Rini @ 2016-03-16 1:05 UTC (permalink / raw)
To: u-boot
Starting with 96e5b03 we use a linker list for partition table
information. However since we use this in SPL we need to make sure that
the SPL linker scripts include these as well. While doing this, it's
best to simply include all linker lists to future proof ourselves.
Cc: Andreas Bie?mann <andreas.devel@googlemail.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reported-by: Nishanth Menon <nm@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Changes in v3:
- Rework things again, after some testing we don't need to worry about
including empty lists, the linker doesn't waste binary space. Also
update the at91 linker lists and build time confirm that they were
also broken by the opening commit.
Changes in v2:
- Drop the CONFIG_SPL_DM tests for zynq as DM is the only case for zynq
and while in here drop a now useless line.
---
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 2 +-
arch/arm/cpu/u-boot-spl.lds | 9 +--------
arch/arm/mach-at91/arm926ejs/u-boot-spl.lds | 3 +++
arch/arm/mach-at91/armv7/u-boot-spl.lds | 3 +++
arch/arm/mach-zynq/u-boot-spl.lds | 7 +------
5 files changed, 9 insertions(+), 15 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
index ccd0c83..8fec715 100644
--- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
@@ -35,7 +35,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- KEEP(*(SORT(.u_boot_list*_i2c_*)));
+ KEEP(*(SORT(.u_boot_list*)));
} >.sram
. = ALIGN(4);
diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
index c5b4f7c..068163b 100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@ -32,15 +32,8 @@ SECTIONS
}
. = ALIGN(4);
-#ifdef CONFIG_SPL_DM
.u_boot_list : {
- KEEP(*(SORT(.u_boot_list_*_driver_*)));
- KEEP(*(SORT(.u_boot_list_*_uclass_*)));
- }
-#endif
- . = .;
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*_i2c_*)));
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN(4);
diff --git a/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds b/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
index acadd1d..1b04206 100644
--- a/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
+++ b/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
@@ -30,6 +30,9 @@ SECTIONS
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
. = ALIGN(4);
+ .u_boot_list : { KEEP(*(SORT(.u_boot_list*))) } > .sram
+
+ . = ALIGN(4);
__image_copy_end = .;
.end :
diff --git a/arch/arm/mach-at91/armv7/u-boot-spl.lds b/arch/arm/mach-at91/armv7/u-boot-spl.lds
index eccca43..c667c55 100644
--- a/arch/arm/mach-at91/armv7/u-boot-spl.lds
+++ b/arch/arm/mach-at91/armv7/u-boot-spl.lds
@@ -37,6 +37,9 @@ SECTIONS
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
. = ALIGN(4);
+ .u_boot_list : { KEEP(*(SORT(.u_boot_list*))) } > .sram
+
+ . = ALIGN(4);
__image_copy_end = .;
.end :
diff --git a/arch/arm/mach-zynq/u-boot-spl.lds b/arch/arm/mach-zynq/u-boot-spl.lds
index ecdf6a0..9a59164 100644
--- a/arch/arm/mach-zynq/u-boot-spl.lds
+++ b/arch/arm/mach-zynq/u-boot-spl.lds
@@ -38,16 +38,11 @@ SECTIONS
} > .sram
. = ALIGN(4);
-#ifdef CONFIG_SPL_DM
.u_boot_list : {
- KEEP(*(SORT(.u_boot_list_*_driver_*)));
- KEEP(*(SORT(.u_boot_list_*_uclass_*)));
+ KEEP(*(SORT(.u_boot_list*)));
} > .sram
. = ALIGN(4);
-#endif
-
- . = .;
_image_binary_end = .;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH v3] spl: arm: Make sure to include u_boot_list_*_part_disk_*
2016-03-16 1:05 [U-Boot] [PATCH v3] spl: arm: Make sure to include u_boot_list_*_part_disk_* Tom Rini
@ 2016-03-16 1:16 ` Tom Rini
2016-03-16 1:18 ` Michal Simek
1 sibling, 0 replies; 3+ messages in thread
From: Tom Rini @ 2016-03-16 1:16 UTC (permalink / raw)
To: u-boot
On Tue, Mar 15, 2016 at 09:05:55PM -0400, Tom Rini wrote:
> Starting with 96e5b03 we use a linker list for partition table
> information. However since we use this in SPL we need to make sure that
> the SPL linker scripts include these as well. While doing this, it's
> best to simply include all linker lists to future proof ourselves.
... and yes, I need to update the commit subject, oops.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160315/5394a5cf/attachment.sig>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH v3] spl: arm: Make sure to include u_boot_list_*_part_disk_*
2016-03-16 1:05 [U-Boot] [PATCH v3] spl: arm: Make sure to include u_boot_list_*_part_disk_* Tom Rini
2016-03-16 1:16 ` Tom Rini
@ 2016-03-16 1:18 ` Michal Simek
1 sibling, 0 replies; 3+ messages in thread
From: Michal Simek @ 2016-03-16 1:18 UTC (permalink / raw)
To: u-boot
On 16.3.2016 02:05, Tom Rini wrote:
> Starting with 96e5b03 we use a linker list for partition table
> information. However since we use this in SPL we need to make sure that
> the SPL linker scripts include these as well. While doing this, it's
> best to simply include all linker lists to future proof ourselves.
>
> Cc: Andreas Bie?mann <andreas.devel@googlemail.com>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Reported-by: Nishanth Menon <nm@ti.com>
> Tested-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Tom Rini <trini@konsulko.com>
> ---
> Changes in v3:
> - Rework things again, after some testing we don't need to worry about
> including empty lists, the linker doesn't waste binary space. Also
> update the at91 linker lists and build time confirm that they were
> also broken by the opening commit.
> Changes in v2:
> - Drop the CONFIG_SPL_DM tests for zynq as DM is the only case for zynq
> and while in here drop a now useless line.
> ---
> arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 2 +-
> arch/arm/cpu/u-boot-spl.lds | 9 +--------
> arch/arm/mach-at91/arm926ejs/u-boot-spl.lds | 3 +++
> arch/arm/mach-at91/armv7/u-boot-spl.lds | 3 +++
> arch/arm/mach-zynq/u-boot-spl.lds | 7 +------
> 5 files changed, 9 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
> index ccd0c83..8fec715 100644
> --- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
> +++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
> @@ -35,7 +35,7 @@ SECTIONS
>
> . = ALIGN(4);
> .u_boot_list : {
> - KEEP(*(SORT(.u_boot_list*_i2c_*)));
> + KEEP(*(SORT(.u_boot_list*)));
> } >.sram
>
> . = ALIGN(4);
> diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
> index c5b4f7c..068163b 100644
> --- a/arch/arm/cpu/u-boot-spl.lds
> +++ b/arch/arm/cpu/u-boot-spl.lds
> @@ -32,15 +32,8 @@ SECTIONS
> }
>
> . = ALIGN(4);
> -#ifdef CONFIG_SPL_DM
> .u_boot_list : {
> - KEEP(*(SORT(.u_boot_list_*_driver_*)));
> - KEEP(*(SORT(.u_boot_list_*_uclass_*)));
> - }
> -#endif
> - . = .;
> - .u_boot_list : {
> - KEEP(*(SORT(.u_boot_list*_i2c_*)));
> + KEEP(*(SORT(.u_boot_list*)));
> }
>
> . = ALIGN(4);
> diff --git a/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds b/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
> index acadd1d..1b04206 100644
> --- a/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
> +++ b/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
> @@ -30,6 +30,9 @@ SECTIONS
> .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
>
> . = ALIGN(4);
> + .u_boot_list : { KEEP(*(SORT(.u_boot_list*))) } > .sram
> +
> + . = ALIGN(4);
> __image_copy_end = .;
>
> .end :
> diff --git a/arch/arm/mach-at91/armv7/u-boot-spl.lds b/arch/arm/mach-at91/armv7/u-boot-spl.lds
> index eccca43..c667c55 100644
> --- a/arch/arm/mach-at91/armv7/u-boot-spl.lds
> +++ b/arch/arm/mach-at91/armv7/u-boot-spl.lds
> @@ -37,6 +37,9 @@ SECTIONS
> .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
>
> . = ALIGN(4);
> + .u_boot_list : { KEEP(*(SORT(.u_boot_list*))) } > .sram
> +
> + . = ALIGN(4);
> __image_copy_end = .;
>
> .end :
> diff --git a/arch/arm/mach-zynq/u-boot-spl.lds b/arch/arm/mach-zynq/u-boot-spl.lds
> index ecdf6a0..9a59164 100644
> --- a/arch/arm/mach-zynq/u-boot-spl.lds
> +++ b/arch/arm/mach-zynq/u-boot-spl.lds
> @@ -38,16 +38,11 @@ SECTIONS
> } > .sram
>
> . = ALIGN(4);
> -#ifdef CONFIG_SPL_DM
> .u_boot_list : {
> - KEEP(*(SORT(.u_boot_list_*_driver_*)));
> - KEEP(*(SORT(.u_boot_list_*_uclass_*)));
> + KEEP(*(SORT(.u_boot_list*)));
> } > .sram
>
> . = ALIGN(4);
> -#endif
> -
> - . = .;
>
> _image_binary_end = .;
>
>
For Zynq size didn't change which is good sign.
When you change that commit message feel free to add my
Acked-by: Michal Simek <michal.simek@xilinx.com>
Thanks,
Michal
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-03-16 1:18 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-03-16 1:05 [U-Boot] [PATCH v3] spl: arm: Make sure to include u_boot_list_*_part_disk_* Tom Rini
2016-03-16 1:16 ` Tom Rini
2016-03-16 1:18 ` Michal Simek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox