[U-Boot] [PATCH v3 4/4] board: pic32mzda: enable USB-host, USB-storage support.

[Daniel Schwierzeck <daniel.schwierzeck@gmail.com>]

Am 15.03.2016 um 13:44 schrieb Purna Chandra Mandal:
> Enable MUSB host and USB storage support for Microchip
> PIC32MZ[DA] Starter Kit.
> 
> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
> 
> ---
> 
> Changes in v3:
> - add arch specific reads{bwlq}, writes{bwlq} in respective arch io.h
> - remove reads{bwlq}, writes{bwlq} in musb-new driver
> 
> Changes in v2:
> - compilation fix in drivers/usb/musb-new/linux-compat.h seperated
> - compilation fix in drivers/gadget/f_mass_storage.c seperated
> 
>  arch/mips/dts/pic32mzda.dtsi   | 10 ++++++++++
>  arch/mips/dts/pic32mzda_sk.dts |  4 ++++
>  configs/pic32mzdask_defconfig  |  6 +++++-
>  include/configs/pic32mzdask.h  |  7 +++++++
>  4 files changed, 26 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/mips/dts/pic32mzda.dtsi b/arch/mips/dts/pic32mzda.dtsi
> index 7d180d9..57e4500 100644
> --- a/arch/mips/dts/pic32mzda.dtsi
> +++ b/arch/mips/dts/pic32mzda.dtsi
> @@ -171,4 +171,14 @@
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  	};
> +
> +	usb: musb at 1f8e3000 {
> +		compatible = "microchip,pic32mzda-usb";
> +		reg = <0x1f8e3000 0x1000>,
> +		      <0x1f884000 0x1000>;
> +		reg-names = "mc", "control";
> +		interrupts = <132 IRQ_TYPE_EDGE_RISING>,
> +			     <133 IRQ_TYPE_LEVEL_HIGH>;
> +		status = "disabled";
> +	};
>  };
> diff --git a/arch/mips/dts/pic32mzda_sk.dts b/arch/mips/dts/pic32mzda_sk.dts
> index e5ce0bd..0a7847e 100644
> --- a/arch/mips/dts/pic32mzda_sk.dts
> +++ b/arch/mips/dts/pic32mzda_sk.dts
> @@ -52,4 +52,8 @@
>  	ethernet_phy: lan8740_phy at 0 {
>  		reg = <0>;
>  	};
> +};
> +
> +&usb {
> +	status = "okay";
>  };
> \ No newline at end of file
> diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig
> index 1dbe1b5..544112f 100644
> --- a/configs/pic32mzdask_defconfig
> +++ b/configs/pic32mzdask_defconfig
> @@ -12,6 +12,7 @@ CONFIG_SYS_PROMPT="dask # "
>  CONFIG_LOOPW=y
>  CONFIG_CMD_MEMTEST=y
>  CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_USB=y
>  # CONFIG_CMD_FPGA is not set
>  CONFIG_CMD_GPIO=y
>  CONFIG_CMD_RARP=y
> @@ -28,6 +29,9 @@ CONFIG_DM_ETH=y
>  CONFIG_PIC32_ETH=y
>  CONFIG_PINCTRL=y
>  # CONFIG_PINCTRL_FULL is not set
> -CONFIG_SYS_VSNPRINTF=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_MUSB_HOST=y
> +CONFIG_USB_STORAGE=y
>  CONFIG_USE_TINY_PRINTF=y
>  CONFIG_CMD_DHRYSTONE=y
> diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h
> index 2d35a0b..1d5be2b 100644
> --- a/include/configs/pic32mzdask.h
> +++ b/include/configs/pic32mzdask.h
> @@ -117,6 +117,12 @@
>  #define CONFIG_GENERIC_MMC
>  #define CONFIG_CMD_MMC
>  
> +/*--------------------------------------------------
> + * USB Configuration
> + */
> +#define CONFIG_USB_MUSB_PIO_ONLY
> +#define CONFIG_SYS_CACHELINE_SIZE	16

I see CONFIG_SYS_CACHELINE_SIZE is used in drivers/usb/ in various memalign() calls. Actually we have ARCH_DMA_MINALIGN for this case. At least for MIPS I want to get rid of CONFIG_SYS_CACHELINE_SIZE in the future becasue we have auto-detection for that. 

If possible I'd like to see a patch which replaces CONFIG_SYS_CACHELINE_SIZE with ARCH_DMA_MINALIGN in drivers/user/. Marek what do you think?

> +
>  /*-----------------------------------------------------------------------
>   * File System Configuration
>   */
> @@ -167,6 +173,7 @@
>  
>  #define BOOT_TARGET_DEVICES(func)	\
>  	func(MMC, mmc, 0)		\
> +	func(USB, usb, 0)		\
>  	func(DHCP, dhcp, na)
>  
>  #include <config_distro_bootcmd.h>
> 

-- 
- Daniel