[U-Boot] sunxi: Support SID e-fuses on A83T and H3

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 27-01-16 09:34, Chen-Yu Tsai wrote:
> On the A83T and H3, the SID block is at a different address.
> Furthurmore, the e-fuses are at an offset of 0x200 within the
> hardware's address space.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Thanks, applied to my tree and this will go out with the
next pull-req.

Regards,

Hans


> ---
>   arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 7 +++++++
>   1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
> index 0cdefdc..f797649 100644
> --- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
> +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
> @@ -74,7 +74,14 @@
>   #define SUNXI_AD_DA_BASE		0x01c22c00
>   #define SUNXI_KEYPAD_BASE		0x01c23000
>   #define SUNXI_TZPC_BASE			0x01c23400
> +
> +#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3)
> +/* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
> +#define SUNXI_SID_BASE			0x01c14200
> +#else
>   #define SUNXI_SID_BASE			0x01c23800
> +#endif
> +
>   #define SUNXI_SJTAG_BASE		0x01c23c00
>
>   #define SUNXI_TP_BASE			0x01c25000
>