From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Date: Sun, 20 Mar 2016 14:47:04 +0100 Subject: [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: Add support for Cubietruck Plus In-Reply-To: <1538990.SSYoUtQXKX@anubis.ausil.us> References: <1453883684-2447-1-git-send-email-wens@csie.org> <1453883684-2447-2-git-send-email-wens@csie.org> <1538990.SSYoUtQXKX@anubis.ausil.us> Message-ID: <56EEA9D8.5070501@redhat.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de hI, On 19-03-16 23:43, Dennis Gilmore wrote: > Hans, > > What is the status of this patch? I added this to my sunxi-wip tree (including a fix for the build error) a couple of days ago. I will send a pull-req for various u-boot sunxi patch soonish and then it will hit mainline. Regards, Hans > > Dennis > > On Wednesday, January 27, 2016 4:34:44 PM CDT Chen-Yu Tsai wrote: >> Cubietruck Plus is a A83T/H8 based development board. The board has >> standard DDR3 SDRAM, AXP818 PMIC/codec, SD/MMC, eMMC, USB 2.0 host >> via HSIC USB Hub, USB OTG, SATA via USB bridge, gigabit ethernet, >> WiFi, headphone out / mic in, and various GPIO headers. >> >> The board also has an EEPROM on i2c0 which holds the MAC address. >> >> DLDO3 and DLDO4 provide power to the EMAC pins and PHY. Pin PA20 >> is connected to the reset control of the PHY. EMAC is not actually >> supported yet. >> >> The DTS is the same as the one already in the kernel. >> >> Signed-off-by: Chen-Yu Tsai >> --- >> arch/arm/dts/Makefile | 1 + >> arch/arm/dts/sun8i-a83t-cubietruck-plus.dts | 65 >> +++++++++++++++++++++++++++++ configs/Cubietruck_plus_defconfig | >> 18 ++++++++ >> 3 files changed, 84 insertions(+) >> create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus.dts >> create mode 100644 configs/Cubietruck_plus_defconfig >> >> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile >> index 1c7d359..e338db5 100644 >> --- a/arch/arm/dts/Makefile >> +++ b/arch/arm/dts/Makefile >> @@ -184,6 +184,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \ >> sun8i-a33-sinlinx-sina33.dtb >> dtb-$(CONFIG_MACH_SUN8I_A83T) += \ >> sun8i-a83t-allwinner-h8homlet-v2.dtb \ >> + sun8i-a83t-cubietruck-plus.dtb \ >> sun8i-a83t-sinovoip-bpi-m3.dtb >> dtb-$(CONFIG_MACH_SUN8I_H3) += \ >> sun8i-h3-orangepi-pc.dtb \ >> diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts >> b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts new file mode 100644 >> index 0000000..88b1e09 >> --- /dev/null >> +++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts >> @@ -0,0 +1,65 @@ >> +/* >> + * Copyright 2015 Chen-Yu Tsai >> + * >> + * Chen-Yu Tsai >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPL or the X11 license, at your option. Note that this dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This file is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This file is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> + >> +/dts-v1/; >> +#include "sun8i-a83t.dtsi" >> + >> +/ { >> + model = "Cubietech Cubietruck Plus"; >> + compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t"; >> + >> + aliases { >> + serial0 = &uart0; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&uart0 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart0_pins_b>; >> + status = "okay"; >> +}; >> diff --git a/configs/Cubietruck_plus_defconfig >> b/configs/Cubietruck_plus_defconfig new file mode 100644 >> index 0000000..bb0b336 >> --- /dev/null >> +++ b/configs/Cubietruck_plus_defconfig >> @@ -0,0 +1,18 @@ >> +CONFIG_ARM=y >> +CONFIG_ARCH_SUNXI=y >> +CONFIG_MACH_SUN8I_A83T=y >> +CONFIG_DRAM_CLK=672 >> +CONFIG_DRAM_ZQ=15355 >> +CONFIG_DRAM_ODT_EN=y >> +CONFIG_MMC0_CD_PIN="PF6" >> +CONFIG_I2C0_ENABLE=y >> +CONFIG_AXP_GPIO=y >> +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus" >> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set >> +CONFIG_SPL=y >> +CONFIG_SYS_EXTRA_OPTIONS="RGMII,MACPWR=SUNXI_GPD(20)" >> +# CONFIG_CMD_IMLS is not set >> +# CONFIG_CMD_FLASH is not set >> +# CONFIG_CMD_FPGA is not set >> +CONFIG_AXP_DLDO3_VOLT=2500 >> +CONFIG_AXP_DLDO4_VOLT=3300 > >