From: Eric Nelson <eric@nelint.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC V2 PATCH 1/3] drivers: block: add block device cache
Date: Mon, 21 Mar 2016 10:59:33 -0700 [thread overview]
Message-ID: <56F03685.8090202@nelint.com> (raw)
In-Reply-To: <1458524727-4643-2-git-send-email-eric@nelint.com>
On 03/20/2016 06:45 PM, Eric Nelson wrote:
> Add a block device cache to speed up repeated reads of block devices by
> various filesystems.
>
...
>
> Signed-off-by: Eric Nelson <eric@nelint.com>
> ---
> drivers/block/Makefile | 1 +
> drivers/block/cache_block.c | 240 ++++++++++++++++++++++++++++++++++++++++++++
> include/part.h | 69 +++++++++++++
> 3 files changed, 310 insertions(+)
> create mode 100644 drivers/block/cache_block.c
>
...
> diff --git a/include/part.h b/include/part.h
> index dc8e72e..1ac73dcc 100644
> --- a/include/part.h
> +++ b/include/part.h
> @@ -376,4 +376,73 @@ int gpt_verify_partitions(struct blk_desc *dev_desc,
> gpt_header *gpt_head, gpt_entry **gpt_pte);
> #endif
>
I think this stuff now belongs in blk.h instead of part.h:
> +#ifdef CONFIG_BLOCK_CACHE
> +/**
> + * cache_block_read() - attempt to read a set of blocks from cache
> + *
> + * @param iftype - IF_TYPE_x for type of device
next prev parent reply other threads:[~2016-03-21 17:59 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-21 1:45 [U-Boot] [RFC V2 PATCH 0/3] Add cache for block devices Eric Nelson
2016-03-21 1:45 ` [U-Boot] [RFC V2 PATCH 1/3] drivers: block: add block device cache Eric Nelson
2016-03-21 17:59 ` Eric Nelson [this message]
2016-03-23 17:22 ` Stephen Warren
2016-03-23 17:43 ` Eric Nelson
2016-03-21 1:45 ` [U-Boot] [RFC V2 PATCH 2/3] block: add Kconfig options for [CMD_]BLOCK_CACHE Eric Nelson
2016-03-23 17:24 ` Stephen Warren
2016-03-23 17:45 ` Eric Nelson
2016-03-21 1:45 ` [U-Boot] [RFC V2 PATCH 3/3] mmc: add support for block device cache Eric Nelson
2016-03-23 17:27 ` Stephen Warren
2016-03-23 17:46 ` Eric Nelson
2016-03-21 1:59 ` [U-Boot] [RFC V2 PATCH 0/3] Add cache for block devices Marek Vasut
2016-03-21 13:48 ` Eric Nelson
2016-03-21 16:49 ` Marek Vasut
2016-03-21 17:56 ` Eric Nelson
2016-03-21 18:54 ` Marek Vasut
2016-03-27 19:00 ` [U-Boot] [PATCH " Eric Nelson
2016-03-27 19:00 ` [U-Boot] [PATCH 1/3] drivers: block: add block device cache Eric Nelson
2016-03-28 14:16 ` Tom Rini
2016-03-28 14:33 ` Eric Nelson
2016-03-28 16:24 ` [U-Boot] [PATCH V2 " Eric Nelson
2016-03-28 17:05 ` [U-Boot] [PATCH V3 " Eric Nelson
2016-03-30 14:36 ` Stephen Warren
2016-03-30 15:19 ` Tom Rini
2016-03-30 15:21 ` Stephen Warren
2016-03-30 17:37 ` Eric Nelson
2016-03-30 17:34 ` Eric Nelson
2016-03-30 21:57 ` Stephen Warren
2016-03-31 20:24 ` Eric Nelson
2016-04-01 22:57 ` Stephen Warren
2016-04-01 23:16 ` Eric Nelson
2016-04-01 23:41 ` Tom Rini
2016-04-02 14:17 ` Eric Nelson
2016-04-02 2:07 ` Stephen Warren
2016-04-02 14:24 ` Eric Nelson
2016-04-02 1:59 ` [U-Boot] [U-Boot, V3, " Tom Rini
2016-04-02 14:19 ` Eric Nelson
2016-04-02 14:37 ` [U-Boot] [PATCH 0/3] minor blkcache updates Eric Nelson
2016-04-02 14:37 ` [U-Boot] [PATCH 1/3] cmd: blkcache: remove indentation from output of 'show' Eric Nelson
2016-04-12 2:28 ` [U-Boot] [U-Boot, " Tom Rini
2016-04-02 14:37 ` [U-Boot] [PATCH 2/3] cmd: blkcache: simplify sub-command handling Eric Nelson
2016-04-04 17:39 ` Stephen Warren
2016-04-12 2:28 ` [U-Boot] [U-Boot, " Tom Rini
2016-04-02 14:37 ` [U-Boot] [PATCH 3/3] drivers: block: fix placement of parameters Eric Nelson
2016-04-12 2:29 ` [U-Boot] [U-Boot, " Tom Rini
2016-03-27 19:00 ` [U-Boot] [PATCH 2/3] mmc: use block layer in mmc command Eric Nelson
2016-03-28 14:16 ` Tom Rini
2016-04-02 1:58 ` [U-Boot] [U-Boot,2/3] " Tom Rini
2016-03-27 19:00 ` [U-Boot] [PATCH 3/3] sata: use block layer for sata command Eric Nelson
2016-03-28 14:16 ` Tom Rini
2016-04-02 1:59 ` [U-Boot] [U-Boot,3/3] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56F03685.8090202@nelint.com \
--to=eric@nelint.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox