[U-Boot] [PATCH] sunxi: Add defconfig for Sinlinx SinA31s

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 21-03-16 09:39, Chen-Yu Tsai wrote:
> The Sinlinx A31s SDK is a A31s based module/baseboard development kit.
>
> The core module has the SoC, PMIC, DRAM, eMMC and supporting components.
> There are also pads for UART0, JTAG and I2S.
>
> The baseboard has 100 Mbps Ethernet, 5x USB 2.0 host ports via a USB 2.0
> hub chip, MMC, HDMI, SPDIF, CIR, audio jacks, 2 tablet-like volume
> buttons, RS232 style UART and USB OTG (though VBUS is not connected).
> Various headers are available for other addon modules, such as SDIO
> WiFi, LCD display, camera sensor, UARTs, I2C, SPI and GPIOs.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Thanks, applied.

Regards,

Hans

> ---
>   board/sunxi/MAINTAINERS           |  6 ++++++
>   configs/Sinlinx_SinA31s_defconfig | 21 +++++++++++++++++++++
>   2 files changed, 27 insertions(+)
>   create mode 100644 configs/Sinlinx_SinA31s_defconfig
>
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index 5ae5ce6..8cb9051 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -191,6 +191,12 @@ M:	Siarhei Siamashka <siarhei.siamashka@gmail.com>
>   S:	Maintained
>   F:	configs/MSI_Primo81_defconfig
>
> +SINLINX SINA31s BOARD
> +M:	Chen-Yu Tsai <wens@csie.org>
> +S:	Maintained
> +F:	configs/Sinlinx_SinA31s_defconfig
> +W:	http://linux-sunxi.org/Sinlinx_SinA31s
> +
>   SINLINX SINA33 BOARD
>   M:	Chen-Yu Tsai <wens@csie.org>
>   S:	Maintained
> diff --git a/configs/Sinlinx_SinA31s_defconfig b/configs/Sinlinx_SinA31s_defconfig
> new file mode 100644
> index 0000000..9254bb2
> --- /dev/null
> +++ b/configs/Sinlinx_SinA31s_defconfig
> @@ -0,0 +1,21 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_MACH_SUN6I=y
> +CONFIG_DRAM_CLK=432
> +CONFIG_DRAM_ZQ=251
> +CONFIG_MMC0_CD_PIN="PA4"
> +CONFIG_MMC3_PINS="PC"
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=3
> +CONFIG_USB1_VBUS_PIN=""
> +CONFIG_USB2_VBUS_PIN=""
> +CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sina31s"
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_SPL=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_FPGA is not set
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_AXP_DLDO1_VOLT=3300
> +CONFIG_USB_EHCI_HCD=y
>