[U-Boot] [PATCH] sunxi: sinovoip-bpi-m3: drop LDO settings from defconfig

Vishnu Patekar
2016-03-21T14:28:56Z

Kconfig default settings are same as mentioned Sinovoip
Bpi-m3 schematic.

As axp818 ALDO support is enabled, it causes bpi-m3 fail to boot
if ALDOs are set to 0.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
---
configs/Sinovoip_BPI_M3_defconfig | 3 ---
1 file changed, 3 deletions(-)

diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig
index b96be50..eae7191 100644
--- a/configs/Sinovoip_BPI_M3_defconfig
+++ b/configs/Sinovoip_BPI_M3_defconfig
@@ -21,6 +21,3 @@ CONFIG_AXP_DCDC2_VOLT=900
CONFIG_AXP_DCDC3_VOLT=900
CONFIG_AXP_DCDC4_VOLT=0
CONFIG_AXP_DCDC5_VOLT=1200
-CONFIG_AXP_ALDO2_VOLT=0
-CONFIG_AXP_ALDO3_VOLT=0
-CONFIG_AXP_DLDO4_VOLT=0
--
1.9.1