* [U-Boot] [PATCH] sunxi: Add defconfig for yones toptech bs1078-v2 tablet
@ 2016-03-22 21:02 Peter Korsgaard
2016-03-22 21:53 ` [U-Boot] [linux-sunxi] " Hans de Goede
0 siblings, 1 reply; 2+ messages in thread
From: Peter Korsgaard @ 2016-03-22 21:02 UTC (permalink / raw)
To: u-boot
The yones toptech bs1078-v2 is a 10.1" tablet without any clear markings on
the outside, but 'YONESTOPTECH-BS1078' written on the PCB silkscreen.
It features a 16:9 1024:600 LCD, A31s SoC, 1GB RAM, 8G NAND, silead gsl3675
touchscreen and a RTL8723AS wifi chip:
https://linux-sunxi.org/Yones_Toptech_BS1078_V2
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
---
board/sunxi/MAINTAINERS | 5 +++++
configs/Yones_Toptech_BS1078_V2_defconfig | 24 ++++++++++++++++++++++++
2 files changed, 29 insertions(+)
create mode 100644 configs/Yones_Toptech_BS1078_V2_defconfig
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 5ae5ce6..4370303 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -211,3 +211,8 @@ YONES TOPTECH BD1078 BOARD
M: Paul Kocialkowski <contact@paulk.fr>
S: Maintained
F: configs/Yones_Toptech_BD1078_defconfig
+
+YONES TOPTECH BS1078 V2 BOARD
+M: Peter Korsgaard <peter@korsgaard.com>
+S: Maintained
+F: configs/Yones_Toptech_BS1078_V2_defconfig
diff --git a/configs/Yones_Toptech_BS1078_V2_defconfig b/configs/Yones_Toptech_BS1078_V2_defconfig
new file mode 100644
index 0000000..26f5923
--- /dev/null
+++ b/configs/Yones_Toptech_BS1078_V2_defconfig
@@ -0,0 +1,24 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN6I=y
+CONFIG_DRAM_CLK=420
+CONFIG_DRAM_ZQ=251
+CONFIG_MMC0_CD_PIN="PA8"
+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PA15"
+CONFIG_AXP_GPIO=y
+CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:24,pclk_khz:70000,le:120,ri:180,up:17,lo:15,hs:20,vs:3,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
+CONFIG_VIDEO_LCD_BL_EN="PA25"
+CONFIG_VIDEO_LCD_BL_PWM="PH13"
+CONFIG_VIDEO_LCD_PANEL_LVDS=y
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-yones-toptech-bs1078-v2"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_USB_MUSB_HOST=y
--
2.7.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [linux-sunxi] [PATCH] sunxi: Add defconfig for yones toptech bs1078-v2 tablet
2016-03-22 21:02 [U-Boot] [PATCH] sunxi: Add defconfig for yones toptech bs1078-v2 tablet Peter Korsgaard
@ 2016-03-22 21:53 ` Hans de Goede
0 siblings, 0 replies; 2+ messages in thread
From: Hans de Goede @ 2016-03-22 21:53 UTC (permalink / raw)
To: u-boot
Hi,
On 22-03-16 22:02, Peter Korsgaard wrote:
> The yones toptech bs1078-v2 is a 10.1" tablet without any clear markings on
> the outside, but 'YONESTOPTECH-BS1078' written on the PCB silkscreen.
>
> It features a 16:9 1024:600 LCD, A31s SoC, 1GB RAM, 8G NAND, silead gsl3675
> touchscreen and a RTL8723AS wifi chip:
>
> https://linux-sunxi.org/Yones_Toptech_BS1078_V2
>
> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thanks, applied.
Regards,
Hans
> ---
> board/sunxi/MAINTAINERS | 5 +++++
> configs/Yones_Toptech_BS1078_V2_defconfig | 24 ++++++++++++++++++++++++
> 2 files changed, 29 insertions(+)
> create mode 100644 configs/Yones_Toptech_BS1078_V2_defconfig
>
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index 5ae5ce6..4370303 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -211,3 +211,8 @@ YONES TOPTECH BD1078 BOARD
> M: Paul Kocialkowski <contact@paulk.fr>
> S: Maintained
> F: configs/Yones_Toptech_BD1078_defconfig
> +
> +YONES TOPTECH BS1078 V2 BOARD
> +M: Peter Korsgaard <peter@korsgaard.com>
> +S: Maintained
> +F: configs/Yones_Toptech_BS1078_V2_defconfig
> diff --git a/configs/Yones_Toptech_BS1078_V2_defconfig b/configs/Yones_Toptech_BS1078_V2_defconfig
> new file mode 100644
> index 0000000..26f5923
> --- /dev/null
> +++ b/configs/Yones_Toptech_BS1078_V2_defconfig
> @@ -0,0 +1,24 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_MACH_SUN6I=y
> +CONFIG_DRAM_CLK=420
> +CONFIG_DRAM_ZQ=251
> +CONFIG_MMC0_CD_PIN="PA8"
> +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
> +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
> +CONFIG_USB0_ID_DET="PA15"
> +CONFIG_AXP_GPIO=y
> +CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:24,pclk_khz:70000,le:120,ri:180,up:17,lo:15,hs:20,vs:3,sync:3,vmode:0"
> +CONFIG_VIDEO_LCD_DCLK_PHASE=0
> +CONFIG_VIDEO_LCD_BL_EN="PA25"
> +CONFIG_VIDEO_LCD_BL_PWM="PH13"
> +CONFIG_VIDEO_LCD_PANEL_LVDS=y
> +CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-yones-toptech-bs1078-v2"
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_SPL=y
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_FPGA is not set
> +CONFIG_CMD_GPIO=y
> +CONFIG_AXP_DLDO1_VOLT=3300
> +CONFIG_USB_MUSB_HOST=y
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-03-22 21:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-03-22 21:02 [U-Boot] [PATCH] sunxi: Add defconfig for yones toptech bs1078-v2 tablet Peter Korsgaard
2016-03-22 21:53 ` [U-Boot] [linux-sunxi] " Hans de Goede
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox