From: Hans de Goede <hdegoede@redhat.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/6] Add Pine64 support
Date: Tue, 29 Mar 2016 17:45:45 +0200 [thread overview]
Message-ID: <56FAA329.9070602@redhat.com> (raw)
In-Reply-To: <1459265351-19812-1-git-send-email-agraf@suse.de>
Hi,
On 03/29/2016 05:29 PM, Alexander Graf wrote:
> The Pine64 is a kickstarter backed SBC that runs on the Allwinner A64 SoC.
> This SoC can run AArch64 code, so this patch set lifts all arm version
> indepenent sunxi code into a mach directory and builds the A64 code
> as armv8 (aarch64) code.
>
> With these patches applied, I can successfully boot my 1GB Pine64+ board
> with an openSUSE EFI image.
Can you provide some quick instructions on how to test this ? Bonus
point for a link to a boot0.bin which I can dd to a sdcard and use
with a u-boot.bin build with these patches.
I've a pine64+ myself to test.
Note "[PATCH 3/6] arm: Allow u32 as addrs for readX/writeX"
will need an ack from Albert, the ARM maintainer.
Regards,
Hans
>
> Alex
>
> Alexander Graf (4):
> sunxi: Move cpu independent code to mach directory
> sunxi: Depend SPL configs on SUPPORT_SPL
> arm: Allow u32 as addrs for readX/writeX
> sunxi: Explicitly cast u32 pointer conversions
>
> Siarhei Siamashka (2):
> sunxi: Add support for Allwinner A64 SoCs
> sunxi: Add Pine64+ support
>
> arch/arm/Kconfig | 4 +-
> arch/arm/Makefile | 1 +
> arch/arm/cpu/armv7/sunxi/Makefile | 40 +-
> arch/arm/dts/Makefile | 2 +
> arch/arm/dts/a64.dtsi | 564 +++++++++++++++++++++
> arch/arm/dts/pine64.dts | 62 +++
> arch/arm/dts/pine64_common.dtsi | 76 +++
> arch/arm/dts/pine64_plus.dts | 63 +++
> arch/arm/include/asm/arch-sunxi/clock.h | 3 +-
> arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 4 +-
> arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
> arch/arm/include/asm/arch-sunxi/spl.h | 5 +-
> arch/arm/include/asm/io.h | 18 +-
> arch/arm/include/asm/system.h | 6 +
> arch/arm/mach-sunxi/Makefile | 51 ++
> arch/arm/{cpu/armv7/sunxi => mach-sunxi}/board.c | 30 +-
> arch/arm/{cpu/armv7/sunxi => mach-sunxi}/clock.c | 0
> .../{cpu/armv7/sunxi => mach-sunxi}/clock_sun4i.c | 0
> .../{cpu/armv7/sunxi => mach-sunxi}/clock_sun6i.c | 0
> .../armv7/sunxi => mach-sunxi}/clock_sun8i_a83t.c | 0
> .../{cpu/armv7/sunxi => mach-sunxi}/clock_sun9i.c | 0
> .../arm/{cpu/armv7/sunxi => mach-sunxi}/cpu_info.c | 2 +
> .../{cpu/armv7/sunxi => mach-sunxi}/dram_helpers.c | 0
> .../{cpu/armv7/sunxi => mach-sunxi}/dram_sun4i.c | 0
> .../{cpu/armv7/sunxi => mach-sunxi}/dram_sun6i.c | 0
> .../armv7/sunxi => mach-sunxi}/dram_sun8i_a23.c | 0
> .../armv7/sunxi => mach-sunxi}/dram_sun8i_a33.c | 0
> .../armv7/sunxi => mach-sunxi}/dram_sun8i_a83t.c | 0
> .../armv7/sunxi => mach-sunxi}/dram_sun8i_h3.c | 0
> arch/arm/{cpu/armv7/sunxi => mach-sunxi}/p2wi.c | 0
> arch/arm/{cpu/armv7/sunxi => mach-sunxi}/pinmux.c | 0
> .../arm/{cpu/armv7/sunxi => mach-sunxi}/pmic_bus.c | 0
> arch/arm/{cpu/armv7/sunxi => mach-sunxi}/prcm.c | 0
> arch/arm/{cpu/armv7/sunxi => mach-sunxi}/rsb.c | 0
> arch/arm/{cpu/armv7/sunxi => mach-sunxi}/usb_phy.c | 2 +-
> board/sunxi/Kconfig | 9 +-
> board/sunxi/board.c | 38 +-
> configs/pine64_plus_defconfig | 12 +
> drivers/mmc/sunxi_mmc.c | 6 +-
> drivers/power/Kconfig | 2 +-
> include/configs/sun50i.h | 22 +
> include/configs/sunxi-common.h | 20 +-
> 42 files changed, 977 insertions(+), 66 deletions(-)
> create mode 100644 arch/arm/dts/a64.dtsi
> create mode 100644 arch/arm/dts/pine64.dts
> create mode 100644 arch/arm/dts/pine64_common.dtsi
> create mode 100644 arch/arm/dts/pine64_plus.dts
> create mode 100644 arch/arm/mach-sunxi/Makefile
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/board.c (91%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/clock.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/clock_sun4i.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/clock_sun6i.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/clock_sun8i_a83t.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/clock_sun9i.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/cpu_info.c (97%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/dram_helpers.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/dram_sun4i.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/dram_sun6i.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/dram_sun8i_a23.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/dram_sun8i_a33.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/dram_sun8i_a83t.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/dram_sun8i_h3.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/p2wi.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/pinmux.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/pmic_bus.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/prcm.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/rsb.c (100%)
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/usb_phy.c (99%)
> create mode 100644 configs/pine64_plus_defconfig
> create mode 100644 include/configs/sun50i.h
>
next prev parent reply other threads:[~2016-03-29 15:45 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-29 15:29 [U-Boot] [PATCH 0/6] Add Pine64 support Alexander Graf
2016-03-29 15:29 ` [U-Boot] [PATCH 1/6] sunxi: Move cpu independent code to mach directory Alexander Graf
2016-03-29 15:29 ` [U-Boot] [PATCH 2/6] sunxi: Depend SPL configs on SUPPORT_SPL Alexander Graf
2016-03-29 15:29 ` [U-Boot] [PATCH 3/6] arm: Allow u32 as addrs for readX/writeX Alexander Graf
2016-03-29 15:46 ` Hans de Goede
2016-03-29 15:29 ` [U-Boot] [PATCH 4/6] sunxi: Explicitly cast u32 pointer conversions Alexander Graf
2016-03-29 15:29 ` [U-Boot] [PATCH 5/6] sunxi: Add support for Allwinner A64 SoCs Alexander Graf
2016-03-29 15:29 ` [U-Boot] [PATCH 6/6] sunxi: Add Pine64+ support Alexander Graf
2016-03-29 15:45 ` Hans de Goede [this message]
2016-03-29 16:08 ` [U-Boot] [PATCH 0/6] Add Pine64 support Alexander Graf
2016-03-30 7:35 ` Hans de Goede
2016-03-31 18:53 ` Hans de Goede
2016-03-31 19:15 ` Alexander Graf
2016-03-31 19:22 ` Hans de Goede
2016-03-31 19:23 ` Hans de Goede
2016-03-30 15:53 ` [U-Boot] [PATCH 7/6] sunxi: Reserve ATF memory space on A64 Alexander Graf
2016-04-01 11:06 ` Ian Campbell
2016-04-01 11:08 ` Alexander Graf
2016-04-01 11:12 ` Ian Campbell
2016-04-01 11:23 ` Alexander Graf
2016-04-13 19:46 ` Andre Przywara
2016-04-13 19:48 ` Alexander Graf
2016-04-13 20:10 ` André Przywara
2016-04-13 21:26 ` Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56FAA329.9070602@redhat.com \
--to=hdegoede@redhat.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox