[U-Boot] [PATCH] armv8/ls1043aqds: dts: set SPI mode for DSPI

Gong Qianyu
2016-03-23T11:11:36Z

It's necessary to set the clock phase and polarity for DSPI
flash or it could not work properly.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
---
arch/arm/dts/fsl-ls1043a-qds.dtsi | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/fsl-ls1043a-qds.dtsi b/arch/arm/dts/fsl-ls1043a-qds.dtsi
index 66efe67..2e9f1f9 100644
--- a/arch/arm/dts/fsl-ls1043a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1043a-qds.dtsi
@@ -28,8 +28,10 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
- reg = <0>;
spi-max-frequency = <1000000>; /* input clock */
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
};

dflash1: sst25wf040b {
@@ -37,6 +39,8 @@
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <3500000>;
+ spi-cpol;
+ spi-cpha;
reg = <1>;
};

@@ -45,6 +49,8 @@
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <3500000>;
+ spi-cpol;
+ spi-cpha;
reg = <2>;
};
};
--
2.1.0.27.g96db324