From: Alexander Graf <agraf@suse.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/6] Add Pine64 support
Date: Tue, 29 Mar 2016 18:08:34 +0200 [thread overview]
Message-ID: <56FAA882.6080103@suse.de> (raw)
In-Reply-To: <56FAA329.9070602@redhat.com>
On 29.03.16 17:45, Hans de Goede wrote:
> Hi,
>
> On 03/29/2016 05:29 PM, Alexander Graf wrote:
>> The Pine64 is a kickstarter backed SBC that runs on the Allwinner A64
>> SoC.
>> This SoC can run AArch64 code, so this patch set lifts all arm version
>> indepenent sunxi code into a mach directory and builds the A64 code
>> as armv8 (aarch64) code.
>>
>> With these patches applied, I can successfully boot my 1GB Pine64+ board
>> with an openSUSE EFI image.
>
> Can you provide some quick instructions on how to test this ? Bonus
> point for a link to a boot0.bin which I can dd to a sdcard and use
> with a u-boot.bin build with these patches.
Sure. Grab these all the files in this directory:
http://csgraf.de/agraf/pine64
Then do
$ gcc pine64_image.c -o pine64_image
$ cat bl31.bin <u-boot-dir>/u-boot.bin > bl31uboot.bin
$ ./pine64_image scp.bin bl31uboot.bin u-boot.img
$ dd if=boot0.bin of=/dev/mmcblk0 seek=16
$ dd if=u-boot.img of=/dev/mmcblk0 seek=80
That should give you a working system. The scp.bin and boot0.bin are
from the Allwinner binary distribution. ATF (bl31.bin) is built from
these sources:
https://build.opensuse.org/package/show/devel:ARM:Factory:Contrib:Pine64/firmware-pine64
Enjoy,
Alex
next prev parent reply other threads:[~2016-03-29 16:08 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-29 15:29 [U-Boot] [PATCH 0/6] Add Pine64 support Alexander Graf
2016-03-29 15:29 ` [U-Boot] [PATCH 1/6] sunxi: Move cpu independent code to mach directory Alexander Graf
2016-03-29 15:29 ` [U-Boot] [PATCH 2/6] sunxi: Depend SPL configs on SUPPORT_SPL Alexander Graf
2016-03-29 15:29 ` [U-Boot] [PATCH 3/6] arm: Allow u32 as addrs for readX/writeX Alexander Graf
2016-03-29 15:46 ` Hans de Goede
2016-03-29 15:29 ` [U-Boot] [PATCH 4/6] sunxi: Explicitly cast u32 pointer conversions Alexander Graf
2016-03-29 15:29 ` [U-Boot] [PATCH 5/6] sunxi: Add support for Allwinner A64 SoCs Alexander Graf
2016-03-29 15:29 ` [U-Boot] [PATCH 6/6] sunxi: Add Pine64+ support Alexander Graf
2016-03-29 15:45 ` [U-Boot] [PATCH 0/6] Add Pine64 support Hans de Goede
2016-03-29 16:08 ` Alexander Graf [this message]
2016-03-30 7:35 ` Hans de Goede
2016-03-31 18:53 ` Hans de Goede
2016-03-31 19:15 ` Alexander Graf
2016-03-31 19:22 ` Hans de Goede
2016-03-31 19:23 ` Hans de Goede
2016-03-30 15:53 ` [U-Boot] [PATCH 7/6] sunxi: Reserve ATF memory space on A64 Alexander Graf
2016-04-01 11:06 ` Ian Campbell
2016-04-01 11:08 ` Alexander Graf
2016-04-01 11:12 ` Ian Campbell
2016-04-01 11:23 ` Alexander Graf
2016-04-13 19:46 ` Andre Przywara
2016-04-13 19:48 ` Alexander Graf
2016-04-13 20:10 ` André Przywara
2016-04-13 21:26 ` Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56FAA882.6080103@suse.de \
--to=agraf@suse.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox