From: "François-David Collin" <fradav@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2
Date: Fri, 18 Mar 2016 18:33:09 +0100 [thread overview]
Message-ID: <56ec3bd5.8b941c0a.37c90.1d4d@mx.google.com> (raw)
Hi,
As I?m banging my head on this too, please allow me to provide some details
I got two stable situations :
The Lime2 is connected directly to the Gbit interface of my laptop, speed are OK:
1. The Lime2 is connected directly to the Gbit interface of my laptop
[alarm at lime2 ~]$ iperf3 -s -p 5201
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.137.1, port 58077
[ 5] local 192.168.137.58 port 5201 connected to 192.168.137.1 port 58078
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-1.00 sec 81.4 MBytes 683 Mbits/sec
[ 5] 1.00-2.00 sec 82.2 MBytes 690 Mbits/sec
[ 5] 2.00-3.00 sec 85.0 MBytes 713 Mbits/sec
[ 5] 3.00-4.00 sec 82.1 MBytes 689 Mbits/sec
[ 5] 4.00-5.00 sec 87.9 MBytes 738 Mbits/sec
[ 5] 5.00-6.00 sec 78.8 MBytes 661 Mbits/sec
[ 5] 6.00-7.00 sec 75.0 MBytes 629 Mbits/sec
[ 5] 7.00-8.00 sec 88.4 MBytes 741 Mbits/sec
[ 5] 8.00-9.00 sec 69.2 MBytes 581 Mbits/sec
[ 5] 9.00-10.00 sec 67.2 MBytes 564 Mbits/sec
[ 5] 10.00-10.04 sec 2.82 MBytes 660 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-10.04 sec 0.00 Bytes 0.00 bits/sec sender
[ 5] 0.00-10.04 sec 800 MBytes 669 Mbits/sec receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.137.1, port 58081
[ 5] local 192.168.137.58 port 5201 connected to 192.168.137.1 port 58082
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 5] 0.00-1.00 sec 71.4 MBytes 598 Mbits/sec 0 221 KBytes
[ 5] 1.00-2.00 sec 76.0 MBytes 637 Mbits/sec 0 221 KBytes
[ 5] 2.00-3.00 sec 76.8 MBytes 645 Mbits/sec 0 221 KBytes
[ 5] 3.00-4.00 sec 74.1 MBytes 621 Mbits/sec 0 221 KBytes
[ 5] 4.00-5.00 sec 75.0 MBytes 630 Mbits/sec 0 221 KBytes
[ 5] 5.00-6.00 sec 69.4 MBytes 582 Mbits/sec 0 221 KBytes
[ 5] 6.00-7.03 sec 68.6 MBytes 562 Mbits/sec 0 221 KBytes
[ 5] 7.03-8.03 sec 65.3 MBytes 548 Mbits/sec 0 221 KBytes
[ 5] 8.03-9.00 sec 64.1 MBytes 552 Mbits/sec 0 221 KBytes
[ 5] 9.00-10.00 sec 72.8 MBytes 610 Mbits/sec 0 221 KBytes
[ 5] 10.00-10.04 sec 2.27 MBytes 513 Mbits/sec 0 221 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 5] 0.00-10.04 sec 716 MBytes 598 Mbits/sec 0 sender
[ 5] 0.00-10.04 sec 0.00 Bytes 0.00 bits/sec receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
[alarm at lime2 Dev]$ sudo ./mmio-dump 0x1c20164
01c20164: 00000006
[alarm at lime2 Dev]$ sudo i2cdump -f -y 0 0x34
No size specified (using byte-data access)
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: c1 10 00 41 00 00 00 00 00 00 00 00 00 00 00 00 ??.A............
10: 05 00 5f 00 00 00 00 00 00 00 00 00 00 00 00 00 ?._.............
20: 00 00 00 1c 00 00 00 16 cb 54 00 00 00 00 00 00 ...?...??T......
30: 60 03 42 c9 45 22 9d 0a a5 1f 68 5f fc 16 00 00 `?B?E"????h_??..
40: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 ....`...........
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70 02 ..............p?
60: dc 0e 3e 08 00 00 00 00 00 00 00 00 00 00 00 00 ??>?............
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 0e ..............??
80: e0 fd 83 80 32 00 ff 00 00 00 00 00 00 00 00 21 ????2..........!
90: 07 a5 07 07 00 02 00 00 00 00 00 00 00 00 00 00 ????.?..........
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 0c ..............??
b0: 00 00 00 00 00 00 00 00 00 7f 00 ba 00 00 00 00 .........?.?....
c0: 01 01 02 04 07 0d 10 1a 24 2e 35 3d 49 54 5c 63 ????????$.5=IT\c
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
f0: 41 00 80 03 00 00 00 00 00 00 00 00 00 00 00 00 A.??............
2. The Lime2 is connected to one of the 4 Gbit port of my home switch, TX speed are terrible, RX are somewhat OK
[alarm at lime2 ~]$ iperf3 -s -p 5201
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.0.10, port 58657
[ 5] local 192.168.0.8 port 5201 connected to 192.168.0.10 port 58658
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-1.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 1.00-2.00 sec 49.9 KBytes 409 Kbits/sec
[ 5] 2.00-3.00 sec 25.7 KBytes 210 Kbits/sec
[ 5] 3.00-4.00 sec 18.5 KBytes 152 Kbits/sec
[ 5] 4.00-5.00 sec 17.1 KBytes 140 Kbits/sec
[ 5] 5.00-6.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 6.00-7.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 7.00-8.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 8.00-9.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 9.00-10.00 sec 0.00 Bytes 0.00 bits/sec
[ 5] 10.00-10.19 sec 0.00 Bytes 0.00 bits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-10.19 sec 0.00 Bytes 0.00 bits/sec sender
[ 5] 0.00-10.19 sec 111 KBytes 89.4 Kbits/sec receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.0.10, port 58684
[ 5] local 192.168.0.8 port 5201 connected to 192.168.0.10 port 58685
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 5] 0.00-1.01 sec 87.5 MBytes 728 Mbits/sec 0 210 KBytes
[ 5] 1.01-2.01 sec 89.3 MBytes 746 Mbits/sec 0 210 KBytes
[ 5] 2.01-3.00 sec 84.2 MBytes 710 Mbits/sec 0 221 KBytes
[ 5] 3.00-4.00 sec 85.3 MBytes 718 Mbits/sec 0 221 KBytes
[ 5] 4.00-5.01 sec 80.3 MBytes 668 Mbits/sec 0 221 KBytes
[ 5] 5.01-6.01 sec 88.1 MBytes 741 Mbits/sec 0 221 KBytes
[ 5] 6.01-7.00 sec 89.1 MBytes 751 Mbits/sec 0 221 KBytes
[ 5] 7.00-8.01 sec 89.5 MBytes 745 Mbits/sec 0 221 KBytes
[ 5] 8.01-9.00 sec 83.5 MBytes 708 Mbits/sec 0 221 KBytes
[ 5] 9.00-10.00 sec 79.2 MBytes 664 Mbits/sec 0 221 KBytes
[ 5] 10.00-10.06 sec 2.75 MBytes 371 Mbits/sec 0 221 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 5] 0.00-10.06 sec 859 MBytes 716 Mbits/sec 0 sender
[ 5] 0.00-10.06 sec 0.00 Bytes 0.00 bits/sec receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
[alarm at lime2 Dev]$ sudo ./mmio-dump 0x1c20164
01c20164: 00000006
[alarm at lime2 Dev]$ sudo i2cdump -f -y 0 0x34
No size specified (using byte-data access)
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: c1 10 00 41 00 00 00 00 00 00 00 00 00 00 00 00 ??.A............
10: 05 00 5f 00 00 00 00 00 00 00 00 00 00 00 00 00 ?._.............
20: 00 00 00 1c 00 00 00 16 cb 54 00 00 00 00 00 00 ...?...??T......
30: 60 03 42 c9 45 22 9d 0a a5 1f 68 5f fc 16 00 00 `?B?E"????h_??..
40: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 ....`...........
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6c 0a ..............l?
60: dd 08 3e 08 00 00 00 00 00 00 00 00 00 00 00 00 ??>?............
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 0e ..............??
80: e0 fd 83 80 32 00 ff 00 00 00 00 00 00 00 00 21 ????2..........!
90: 07 a5 07 07 00 02 00 00 00 00 00 00 00 00 00 00 ????.?..........
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 06 ..............??
b0: 00 00 00 00 00 00 00 00 00 7f 00 ba 00 00 00 00 .........?.?....
c0: 01 01 02 04 07 0d 10 1a 24 2e 35 3d 49 54 5c 63 ????????$.5=IT\c
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
f0: 41 00 80 03 00 00 00 00 00 00 00 00 00 00 00 00 A.??............
Hope this helps to pinepoint the source of the problem ?
Regards,
--
Fran?ois-David Collin
next reply other threads:[~2016-03-18 17:33 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-18 17:33 François-David Collin [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-03-15 5:41 [U-Boot] [PATCH] Add CONFIG_GMAC_TX_DELAY=4 for OlinuXino Lime2 Michael Haas
[not found] ` <20160315180914.GA1878@excalibur.cnev.de>
2016-03-15 20:41 ` Tom Rini
2016-03-16 8:32 ` Michael Haas
2016-03-16 9:29 ` Hans de Goede
2016-03-16 10:53 ` Hans de Goede
[not found] ` <20160316203642.GC1817@excalibur.cnev.de>
2016-03-17 5:28 ` Michael Haas
2016-03-17 10:52 ` Hans de Goede
2016-03-17 21:53 ` Michael Haas
2016-03-18 7:41 ` Hans de Goede
[not found] ` <20160318190220.GC1815@excalibur.cnev.de>
2016-03-18 19:06 ` Michael Haas
2016-03-20 8:36 ` Michael Haas
2016-03-20 10:05 ` François-David Collin
2016-03-18 20:32 ` Michael Haas
2016-03-18 21:53 ` Michael Haas
2016-03-19 8:39 ` François-David Collin
2016-03-19 9:32 ` Hans de Goede
2016-03-19 9:35 ` Michael Haas
2016-03-19 9:45 ` Michael Haas
2016-03-19 13:40 ` Michael Haas
2016-03-19 14:35 ` François-David Collin
2016-03-20 13:45 ` Hans de Goede
2016-03-20 15:28 ` Michael Haas
2016-03-20 18:51 ` Hans de Goede
[not found] ` <20160321154714.GA4751@excalibur.cnev.de>
2016-03-21 18:57 ` Michael Haas
2016-03-21 20:59 ` Hans de Goede
2016-03-21 21:01 ` Hans de Goede
2016-03-21 21:47 ` Michael Haas
2016-03-21 22:00 ` Hans de Goede
2016-03-22 5:12 ` Michael Haas
2016-03-22 8:46 ` Peter Korsgaard
2016-03-22 8:57 ` Hans de Goede
2016-03-22 9:01 ` Michael Haas
2016-03-22 9:50 ` Peter Korsgaard
[not found] ` <20160321173000.GD4751@excalibur.cnev.de>
2016-03-21 20:56 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56ec3bd5.8b941c0a.37c90.1d4d@mx.google.com \
--to=fradav@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox