[U-Boot] [PATCH 2/2] mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file

[Stefano Babic <sbabic@denx.de>]

On 26/03/2016 17:30, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
> 
> Having CONFIG_SYS_MALLOC_LEN in mx7_common.h is not a good idea,
> because the malloc() pool size is board dependent. 
> 
> For example: if a certain board has support for splashscreen or DFU,
> it may be necessary to adjust CONFIG_SYS_MALLOC_LEN to a larger value.
> 
> So define CONFIG_SYS_MALLOC_LEN in each board config file.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
>  include/configs/mx7_common.h  | 3 ---
>  include/configs/mx7dsabresd.h | 3 +++
>  include/configs/warp7.h       | 4 ++++
>  3 files changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
> index 5034464..9bd6114 100644
> --- a/include/configs/mx7_common.h
> +++ b/include/configs/mx7_common.h
> @@ -28,9 +28,6 @@
>  /* Enable iomux-lpsr support */
>  #define CONFIG_IOMUX_LPSR
>  
> -/* Size of malloc() pool */
> -#define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
> -
>  #define CONFIG_DISPLAY_CPUINFO
>  #define CONFIG_DISPLAY_BOARDINFO
>  
> diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
> index 988d363..25ed29d 100644
> --- a/include/configs/mx7dsabresd.h
> +++ b/include/configs/mx7dsabresd.h
> @@ -16,6 +16,9 @@
>  
>  #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
>  
> +/* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
> +
>  #define CONFIG_BOARD_EARLY_INIT_F
>  #define CONFIG_BOARD_LATE_INIT
>  
> diff --git a/include/configs/warp7.h b/include/configs/warp7.h
> index 5ea5512..d1404b2 100644
> --- a/include/configs/warp7.h
> +++ b/include/configs/warp7.h
> @@ -16,6 +16,10 @@
>  
>  #define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR
>  
> +
> +/* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
> +
>  #define CONFIG_BOARD_EARLY_INIT_F
>  
>  /* MMC Config*/
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================