From: "Andreas Färber" <afaerber@suse.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 20/21] board: Add Qualcomm Dragonboard 410C support
Date: Tue, 5 Apr 2016 02:15:02 +0200 [thread overview]
Message-ID: <57030386.2050309@suse.de> (raw)
In-Reply-To: <20160404235445.GA23105@homes.emlix.com>
Am 05.04.2016 um 01:54 schrieb Daniel Gl?ckner:
> On Tue, Apr 05, 2016 at 01:13:38AM +0200, Andreas F?rber wrote:
>> Am 31.03.2016 um 23:12 schrieb Mateusz Kulikowski:
>>> +/* Environment */
>>> +#define CONFIG_EXTRA_ENV_SETTINGS \
>>> + "reflash="CONFIG_ENV_REFLASH"\0"\
>>> + "loadaddr=0x81000000\0" \
>>> + "fdt_high=0xffffffffffffffff\0" \
>>> + "initrd_high=0xffffffffffffffff\0" \
>>> + "linux_image=Image\0" \
Is linux_image used anywhere? dhcp uses boot_script_dhcp.
>>> + "linux_addr=0x81000000\0"\
>>
>> kernel_addr_r
>>
>>> + "fdt_image=apq8016-sbc.dtb\0" \
fdtfile
>>> + "fdt_addr=0x83000000\0"\
>>
>> fdt_addr_r
>>
>>> + "ramdisk_addr=0x84000000\0"\
>>
>> ramdisk_addr_r
>>
>> These variables that the distro boot depends upon are missing/misnamed.
>
> This reminds me that I had to add scriptaddr to make it run my boot.scr.
I'm testing a local patch but am on travel this week, so maybe Mateusz
or someone else is quicker.
Regards,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Graham Norton
HRB 21284 (AG N?rnberg)
next prev parent reply other threads:[~2016-04-05 0:15 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-31 21:12 [U-Boot] [PATCH v4 00/21] Add support for 96boards Dragonboard410C board Mateusz Kulikowski
2016-03-31 21:12 ` [U-Boot] [PATCH v4 01/21] serial: Add support for Qualcomm serial port Mateusz Kulikowski
2016-04-02 2:01 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 02/21] gpio: Add support for Qualcomm gpio controller Mateusz Kulikowski
2016-04-02 2:01 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 03/21] mmc: Add support for Qualcomm SDHCI controller Mateusz Kulikowski
2016-04-02 2:01 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 04/21] ehci-hcd: Add init_after_reset Mateusz Kulikowski
2016-04-02 2:01 ` [U-Boot] [U-Boot,v4,04/21] " Tom Rini
2016-04-03 10:58 ` Bernhard Nortmann
2016-04-03 11:40 ` Mateusz Kulikowski
2016-03-31 21:12 ` [U-Boot] [PATCH v4 05/21] usb: ulpi: Add Kconfig options for ULPI Mateusz Kulikowski
2016-04-02 2:01 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 06/21] Migrate CONFIG_ULPI* to Kconfig Mateusz Kulikowski
2016-04-02 2:02 ` [U-Boot] [U-Boot,v4,06/21] " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 07/21] usb: ulpi: Fix viewport_addr type Mateusz Kulikowski
2016-04-02 2:02 ` [U-Boot] [U-Boot,v4,07/21] " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 08/21] usb: ulpi: Fix compile warning in read/write on 64-bit machines Mateusz Kulikowski
2016-04-02 2:02 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 09/21] eth: asix88179: Print packet length properly Mateusz Kulikowski
2016-04-02 2:02 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 10/21] usb: Rename ehci-fsl.h to ehci-ci.h Mateusz Kulikowski
2016-04-02 2:02 ` [U-Boot] [U-Boot,v4,10/21] " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 11/21] usb: ehci-ci: Add missing registers Mateusz Kulikowski
2016-04-02 2:02 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 12/21] ehci-ci.h: drop generic USBCMD fields Mateusz Kulikowski
2016-04-02 2:03 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 13/21] ehci: Add support for Qualcomm EHCI Mateusz Kulikowski
2016-04-02 2:03 ` [U-Boot] [U-Boot,v4,13/21] " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 14/21] drivers: Add SPMI bus uclass Mateusz Kulikowski
2016-04-02 2:04 ` [U-Boot] [U-Boot,v4,14/21] " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 15/21] spmi: Add sandbox test driver Mateusz Kulikowski
2016-04-02 2:04 ` [U-Boot] [U-Boot,v4,15/21] " Tom Rini
2016-04-04 15:49 ` Stephen Warren
2016-04-04 16:19 ` Mateusz Kulikowski
2016-04-04 17:09 ` Stephen Warren
2016-04-04 18:02 ` Mateusz Kulikowski
2016-04-04 17:16 ` Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 16/21] drivers: spmi: Add support for Qualcomm SPMI bus driver Mateusz Kulikowski
2016-04-02 2:04 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 17/21] pmic: Add support for Qualcomm PM8916 PMIC Mateusz Kulikowski
2016-04-02 2:04 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 18/21] gpio: Add support for Qualcomm PM8916 gpios Mateusz Kulikowski
2016-04-02 2:05 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 19/21] arm: Add support for Qualcomm Snapdragon family Mateusz Kulikowski
2016-04-02 2:05 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 20/21] board: Add Qualcomm Dragonboard 410C support Mateusz Kulikowski
2016-04-02 2:05 ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-04-04 23:13 ` [U-Boot] [PATCH v4 " Andreas Färber
2016-04-04 23:54 ` Daniel Glöckner
2016-04-05 0:15 ` Andreas Färber [this message]
2016-03-31 21:12 ` [U-Boot] [PATCH v4 21/21] Add myself as Snapdragon and SPMI maintainer Mateusz Kulikowski
2016-04-02 2:06 ` [U-Boot] [U-Boot, v4, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57030386.2050309@suse.de \
--to=afaerber@suse.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox