[U-Boot] [PATCH v6 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller

[Marek Vasut <marex@denx.de>]

On 04/05/2016 11:11 AM, Sriram Dash wrote:
> Enables usb device-tree fixup code to incorporate xhci controller
> 
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com>
> Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
> ---
> Changes in v6:
>   - static const char * const array

This changelog entry is completely useless, it tells me exactly nothing
about what you changed.

> Changes in v5:
>   - Make the array static const
> Changes in v4:
>   - Use a terminating entry in the array for getting node type for controller
> Changes in v3:
>   - Modify the Makefile to remove comparison
>   - Put the supported controllers in array and checking from array
> Changes in v2:
>   - Remove the #defines from the patch and adding controller support
> 
>  drivers/usb/common/Makefile       |  1 +
>  drivers/usb/common/fsl-dt-fixup.c | 32 ++++++++++++++++----------------
>  include/fdt_support.h             |  4 ++--
>  3 files changed, 19 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
> index a38ee4a..2f3d43d 100644
> --- a/drivers/usb/common/Makefile
> +++ b/drivers/usb/common/Makefile
> @@ -4,3 +4,4 @@
>  #
>  
>  obj-$(CONFIG_USB_EHCI_FSL) += fsl-dt-fixup.o
> +obj-$(CONFIG_USB_XHCI_FSL) += fsl-dt-fixup.o
> diff --git a/drivers/usb/common/fsl-dt-fixup.c b/drivers/usb/common/fsl-dt-fixup.c
> index eb13f12..46488dc 100644
> --- a/drivers/usb/common/fsl-dt-fixup.c
> +++ b/drivers/usb/common/fsl-dt-fixup.c
> @@ -19,27 +19,27 @@
>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
>  #endif
>  
> +static const char * const compat_usb_fsl[] = {
> +	"fsl-usb2-mph",
> +	"fsl-usb2-dr",
> +	"snps,dwc3",
> +	NULL
> +};
> +
>  static const char *fdt_usb_get_node_type(void *blob, int start_offset,
>  					 int *node_offset)
>  {
> -	const char *compat_dr = "fsl-usb2-dr";
> -	const char *compat_mph = "fsl-usb2-mph";
>  	const char *node_type = NULL;
> -
> -	*node_offset = fdt_node_offset_by_compatible(blob, start_offset,
> -						     compat_mph);
> -	if (*node_offset < 0) {
> -		*node_offset = fdt_node_offset_by_compatible(blob,
> -							     start_offset,
> -							     compat_dr);
> -		if (*node_offset < 0) {
> -			printf("ERROR: could not find compatible node: %s\n",
> -			       fdt_strerror(*node_offset));
> -		} else {
> -			node_type = compat_dr;
> +	int i;
> +
> +	for (i = 0; compat_usb_fsl[i]; i++) {
> +		*node_offset = fdt_node_offset_by_compatible
> +					(blob, start_offset,
> +					 compat_usb_fsl[i]);
> +		if (*node_offset >= 0) {
> +			node_type = compat_usb_fsl[i];
> +			break;
>  		}
> -	} else {
> -		node_type = compat_mph;
>  	}
>  
>  	return node_type;
> diff --git a/include/fdt_support.h b/include/fdt_support.h
> index 296add0..d34e959 100644
> --- a/include/fdt_support.h
> +++ b/include/fdt_support.h
> @@ -113,11 +113,11 @@ void fdt_fixup_qe_firmware(void *fdt);
>   */
>  int fdt_fixup_display(void *blob, const char *path, const char *display);
>  
> -#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
> +#if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL)
>  void fdt_fixup_dr_usb(void *blob, bd_t *bd);
>  #else
>  static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
> -#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
> +#endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */
>  
>  #if defined(CONFIG_SYS_FSL_SEC_COMPAT)
>  void fdt_fixup_crypto_node(void *blob, int sec_rev);
> 


-- 
Best regards,
Marek Vasut