[U-Boot] [PATCH 3/3] sunxi: Enable usb ports on the Sinovoip BPI M3

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 05-04-16 11:44, Ian Campbell wrote:
> On Sat, 2016-04-02 at 21:10 +0200, Hans de Goede wrote:
>> DLDO3 is used to provide Port-D power and PD is used for the
>> usb-hub / sata-5v enable pins. The 2.5V comes from the schematic
>> and matches the factory image fex file.
>
> Is the dts update being sync'd from the kernel?

Erm, no actually, the A83t USB support for the kernel is not entirely
ready, so we've some very minimal nodes in u-boot's a83t.dtsi for now,
which will get replaced with the real deal when we sync in the future.

The only thing u-boot cares about are controller base address and
the compatible string, and there is no discussion about those,
which is why I merged ChenYu's .dtsi patches with the minimal nodes,
this commit just enables these nodes in the M3 dts.

I do expect the eventual kernel m3.dts changes to be pretty much
identical.

> If yes:
>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>
> Acked-by: Ian Campbell <ijc@hellion.org.uk>
>
> If you also want to mention the kernel sync in the commit message, you
> can also retain the ack (of course).

Regards,

Hans