From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Wed, 06 Apr 2016 17:07:55 +0200 Subject: [U-Boot] FPGA detection failure on Cyclone V soc development kit In-Reply-To: References: <20160121161800.GZ3359@bill-the-cat> <201601211731.07808.marex@denx.de> <56A25A57.5080707@opensource.altera.com> <1453901681.2348.20.camel@altera.com> <1453904178.2016.2.camel@altera.com> Message-ID: <5705264B.8000508@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 01/27/2016 03:18 PM, M?ns Rullg?rd wrote: > Chin Liang See writes: > >> On Wed, 2016-01-27 at 13:46 +0000, M?ns Rullg?rd wrote: >>> Chin Liang See writes: >>> >>>> On Fri, 2016-01-22 at 10:35 -0600, Dinh Nguyen wrote: >>>>> On 01/21/2016 10:31 AM, Marek Vasut wrote: >>>>>> On Thursday, January 21, 2016 at 05:20:33 PM, M?ns Rullg?rd >>>>>> wrote: >>>>>>> Tom Rini writes: >>>>>>>> On Wed, Jan 20, 2016 at 08:31:30PM +0000, M?ns Rullg?rd >>>>>>>> wrote: >>>>>>>>> I'm having a problem with u-boot 2016.01 failing to >>>>>>>>> detect the FPGA on my Altera Cyclone V SoC Development >>>>>>>>> Kit. On startup, it simply prints "FPGA: Not Altera chip >>>>>>>>> ID" (the ID having been read as all -zero). No amount of >>>>>>>>> messing with jumpers or switches makes a difference. The >>>>>>>>> software on the SD card included in the box appears to >>>>>>>>> work, so on a whim I took the SPL pre-loader from this >>>>>>>>> card and combined it with the main 2016.01 u-boot. This >>>>>>>>> makes the detection succeed, despite Marek baulking at >>>>>>>>> this idea. The "good" SPL identifies as "U-Boot SPL >>>>>>>>> 2013.01.01 (Dec 04 2014 - 08:59:41)" which is a different >>>>>>>>> build date than the main u-boot on the same SD card, so >>>>>>>>> which source code version it was built from is anyone's >>>>>>>>> guess. >>>>>>>>> >>>>>>>>> What's interesting is that Marek's board works with u >>>>>>>>> -boot 2016.01 while mine fails even with the very same >>>>>>>>> binary. The boards are different revisions (his >>>>>>>>> 100-0321003-C1, mine -E1), and the main Cyclone V chips >>>>>>>>> are also different (his 5CSXFC6D6F31C8NES, mine >>>>>>>>> 5CSXFC6D6F31C6N). >>>>>>>>> >>>>>>>>> Any suggestions for what to try next? >>>>>>>> v2016.01 release or to of tree? If top of tree, try >>>>>>>> http://patchwork.ozlabs.org/patch/570009/ >>>>>>> Tried release, top of tree, and top of tree with that patch. >>>>>>> Nothing works. >>>> >>>> Both part number is different in speed grade. This is first time I >>>> heard about this issue. A quick suspect might due to clock. Can you >>>> try to copy pll_config.h that is passing (from 2013.01.01) and >>>> replace >>>> the one in 2016? >>> >>> That doesn't work at all. Now it fails to detect the FPGA, then >>> hangs after printing the amount of DRAM. >> >> Can you share with me the pll_config for 2013.01.01 that is working for >> you? > > I don't know that it is. The only thing I've found to work is the > unidentified SPL on the SD card that came with the dev kit. I pushed some DDR fixes into u-boot-socfpga/ddr branch [1], which fixed DDR calibration issue on a board I have in here. Can you try them ? Thanks [1] http://git.denx.de/?p=u-boot/u-boot-socfpga.git;a=shortlog;h=refs/heads/ddr -- Best regards, Marek Vasut