From: York Sun <york.sun@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4] armv8: LS2080A: Consolidate LS2080A and LS2085A
Date: Wed, 6 Apr 2016 10:31:13 -0700 [thread overview]
Message-ID: <570547E1.8050601@nxp.com> (raw)
In-Reply-To: <1459795286-16861-2-git-send-email-york.sun@nxp.com>
On 04/04/2016 11:41 AM, York Sun wrote:
> LS2080A is the primary SoC, and LS2085A is a personality with AIOP
> and DPAA DDR. The RDB and QDS boards support both personality. By
> detecting the SVR at runtime, a single image per board can support
> both SoCs. It gives users flexibility to swtich SoC without the need
> to reprogram the board.
>
> Signed-off-by: York Sun <york.sun@nxp.com>
> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
>
> ---
>
> Changes in v4:
> Rebase to latest master, add changes to secure boot
> Remove ls2085a related defconfig
> Add weak function for soc_has_aiop
> Compile tested on selected arm and powerpc targets
>
> Changes in v3:
> Fix checking AIOP. Tested on LS2080ARDB.
>
> Changes in v2:
> Add checking for SVR before starting AIOP
> Drop RFC from subject
>
> arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 ---
> arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 9 ++++---
> .../arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c | 6 ++++-
> arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 2 +-
> arch/arm/cpu/armv8/fsl-layerscape/soc.c | 26 ++++++++++++++++++-
> arch/arm/cpu/armv8/fsl-layerscape/spl.c | 4 +--
> arch/arm/include/asm/arch-fsl-layerscape/config.h | 9 ++-----
> arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 2 +-
> .../include/asm/arch-fsl-layerscape/fsl_serdes.h | 2 +-
> arch/arm/include/asm/arch-fsl-layerscape/soc.h | 3 +++
> arch/arm/include/asm/fsl_secure_boot.h | 12 ++++-----
> board/freescale/ls2080a/MAINTAINERS | 2 --
> board/freescale/ls2080a/ddr.c | 27 +++++++++++---------
> board/freescale/ls2080a/ls2080a.c | 2 +-
> board/freescale/ls2080aqds/MAINTAINERS | 3 ---
> board/freescale/ls2080aqds/ddr.c | 27 +++++++++++---------
> board/freescale/ls2080aqds/ls2080aqds.c | 2 +-
> board/freescale/ls2080ardb/MAINTAINERS | 3 ---
> board/freescale/ls2080ardb/ddr.c | 27 +++++++++++---------
> board/freescale/ls2080ardb/ls2080ardb.c | 2 +-
> configs/ls2085a_emu_defconfig | 20 ---------------
> configs/ls2085a_simu_defconfig | 21 ---------------
> configs/ls2085aqds_SECURE_BOOT_defconfig | 20 ---------------
> configs/ls2085aqds_defconfig | 19 --------------
> configs/ls2085aqds_nand_defconfig | 14 ----------
> configs/ls2085ardb_SECURE_BOOT_defconfig | 20 ---------------
> configs/ls2085ardb_defconfig | 19 --------------
> configs/ls2085ardb_nand_defconfig | 14 ----------
> doc/device-tree-bindings/serial/8250.txt | 2 +-
> drivers/crypto/fsl/jr.c | 6 ++---
> drivers/net/fsl-mc/mc.c | 10 ++++++++
> drivers/net/ldpaa_eth/Makefile | 1 -
> include/configs/ls2080a_common.h | 7 +----
> include/configs/ls2080a_emu.h | 7 -----
> include/configs/ls2080a_simu.h | 7 -----
> include/linux/usb/xhci-fsl.h | 2 +-
> 36 files changed, 115 insertions(+), 248 deletions(-)
> delete mode 100644 configs/ls2085a_emu_defconfig
> delete mode 100644 configs/ls2085a_simu_defconfig
> delete mode 100644 configs/ls2085aqds_SECURE_BOOT_defconfig
> delete mode 100644 configs/ls2085aqds_defconfig
> delete mode 100644 configs/ls2085aqds_nand_defconfig
> delete mode 100644 configs/ls2085ardb_SECURE_BOOT_defconfig
> delete mode 100644 configs/ls2085ardb_defconfig
> delete mode 100644 configs/ls2085ardb_nand_defconfig
>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kuswaha@nxp.com>
Applied to u-boot-fsl-qoriq master. Awaiting upstream.
York
prev parent reply other threads:[~2016-04-06 17:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-04 18:41 [U-Boot] [PATCH v4 0/1] Use LS2080A as the only SoC name York Sun
2016-04-04 18:41 ` [U-Boot] [PATCH v4] armv8: LS2080A: Consolidate LS2080A and LS2085A York Sun
2016-04-06 5:44 ` Prabhakar Kushwaha
2016-04-06 17:31 ` York Sun [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=570547E1.8050601@nxp.com \
--to=york.sun@nxp.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox