[U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig

[Michal Simek <michal.simek@xilinx.com>]

On 7.4.2016 08:43, Lukasz Majewski wrote:
> Hi Michal,
> 
>> On 6.4.2016 15:59, Lukasz Majewski wrote:
>>> Hi Semen,
>>>
>>>>
>>>> Hi All,
>>>>
>>>> This patch series move next options to Kconfigs/defconfigs:
>>>>  - CONFIG_USB_DWC3*
>>>>  - CONFIG_USB_GADGET_VBUS_DRAW
>>>>  - CONFIG_USB_GADGET_DUALSPEED (partially, only for DWC3 platforms
>>>> for now)
>>>>  - CONFIG_USB_GADGET_DOWNLOAD
>>>>  - CONFIG_G_DNL_*
>>>>
>>>> All defconfig files were post-processed via "make savedefconfig"
>>>> rule to keep correct order of options in defconfigs.
>>>>
>>>> The whole series was tested using buildman tool for all arm boards.
>>>>
>>>
>>> I've reviewed your work and I don't have any objections.
>>>
>>> Now, I'm trying to setup python test environment (DFU, UMS), so I
>>> cannot thoroughly test it.
>>
>> test/py?
> 
> Yes, indeed.
> 
> I've some problems with stdin/stdout operation via u-boot-test-console
> script with using cu on my Odroid XU3.
> 
> I do perform soft reset on my board (by sending "reset") and thereafter
> it seems like no output from u-boot console is examined by pexpect.
> 
> I've asked Stephen for sharing his u-boot-test-console file, so he
> pointed me towards his github:
> 
> https://github.com/swarren/uboot-test-hooks/blob/master/bin/u-boot-test-console
> 
> I hope I will solve this problem today :-).

I am using kermit. I have seen cu too.
I am also running qemu but this should be done on real hw.

Thanks,
Michal