[U-Boot] [PATCH] odroid: Update README with correct firmware link and XU4 support

[Przemyslaw Marczak <p.marczak@samsung.com>]

Hello Shawn,

On 04/08/2016 05:06 AM, Shawn Guo wrote:
> The firmware from link [1] only works with U-Boot image that is no
> bigger than 328KiB.  Using it with the default mainline U-Boot today
> which is already around 500KiB is just not working.  Correct the link
> to be hardkernel_1mb_uboot one [2], so that users can get mainline
> U-Boot work out of box.
>
> While at it, the README is updated to include XU4 support, like DTB file
> name.
>
> [1] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
> [2] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
>
> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
> ---
>   doc/README.odroid | 10 ++++++----
>   1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/doc/README.odroid b/doc/README.odroid
> index ef243d1bde36..c088ec4cb08f 100644
> --- a/doc/README.odroid
> +++ b/doc/README.odroid
> @@ -1,11 +1,11 @@
> - U-Boot for Odroid X2/U3/XU3
> + U-Boot for Odroid X2/U3/XU3/XU4
>   ========================
>
>   1. Summary
>   ==========
>   This is a quick instruction for setup Odroid boards.
>   Board config: odroid_config for X2/U3
> -Board config: odroid-xu3_config for XU3
> +Board config: odroid-xu3_config for XU3/XU4
>
>   2. Supported devices
>   ====================
> @@ -14,6 +14,7 @@ This U-BOOT config can be used on three boards:
>   - Odroid X2
>   with CPU Exynos 4412 rev 2.0 and 2GB of RAM
>   - Odroid XU3
> +- Odroid XU4
>   with CPU Exynos5422 and 2GB of RAM
>
>   3. Boot sequence
> @@ -29,9 +30,9 @@ http://dev.odroid.com/projects/4412boot/wiki/FrontPage?action=download&value=boo
>   or here:
>   http://odroid.in/guides/ubuntu-lfs/boot.tar.gz
>
> -<< XU3 >>
> +<< XU3/XU4 >>
>   It can be downloaded from:
> -https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
> +https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
>
>
>   4. Boot media layout
> @@ -120,6 +121,7 @@ Supported fdt files are:
>   - exynos4412-odroidx2.dtb
>   - exynos4412-odroidu3.dtb
>   - exynos5422-odroidxu3.dtb
> +- exynos5422-odroidxu4.dtb
>
>   Supported kernel files are:
>   - Image.itb
>

Thank you for correcting this.

Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>

Best regards,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com