From mboxrd@z Thu Jan 1 00:00:00 1970 From: Przemyslaw Marczak Date: Fri, 08 Apr 2016 08:54:36 +0200 Subject: [U-Boot] [PATCH] odroid: Update README with correct firmware link and XU4 support In-Reply-To: <1460084802-32435-1-git-send-email-shawnguo@kernel.org> References: <1460084802-32435-1-git-send-email-shawnguo@kernel.org> Message-ID: <570755AC.2090006@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Shawn, On 04/08/2016 05:06 AM, Shawn Guo wrote: > The firmware from link [1] only works with U-Boot image that is no > bigger than 328KiB. Using it with the default mainline U-Boot today > which is already around 500KiB is just not working. Correct the link > to be hardkernel_1mb_uboot one [2], so that users can get mainline > U-Boot work out of box. > > While at it, the README is updated to include XU4 support, like DTB file > name. > > [1] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel > [2] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot > > Signed-off-by: Shawn Guo > --- > doc/README.odroid | 10 ++++++---- > 1 file changed, 6 insertions(+), 4 deletions(-) > > diff --git a/doc/README.odroid b/doc/README.odroid > index ef243d1bde36..c088ec4cb08f 100644 > --- a/doc/README.odroid > +++ b/doc/README.odroid > @@ -1,11 +1,11 @@ > - U-Boot for Odroid X2/U3/XU3 > + U-Boot for Odroid X2/U3/XU3/XU4 > ======================== > > 1. Summary > ========== > This is a quick instruction for setup Odroid boards. > Board config: odroid_config for X2/U3 > -Board config: odroid-xu3_config for XU3 > +Board config: odroid-xu3_config for XU3/XU4 > > 2. Supported devices > ==================== > @@ -14,6 +14,7 @@ This U-BOOT config can be used on three boards: > - Odroid X2 > with CPU Exynos 4412 rev 2.0 and 2GB of RAM > - Odroid XU3 > +- Odroid XU4 > with CPU Exynos5422 and 2GB of RAM > > 3. Boot sequence > @@ -29,9 +30,9 @@ http://dev.odroid.com/projects/4412boot/wiki/FrontPage?action=download&value=boo > or here: > http://odroid.in/guides/ubuntu-lfs/boot.tar.gz > > -<< XU3 >> > +<< XU3/XU4 >> > It can be downloaded from: > -https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel > +https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot > > > 4. Boot media layout > @@ -120,6 +121,7 @@ Supported fdt files are: > - exynos4412-odroidx2.dtb > - exynos4412-odroidu3.dtb > - exynos5422-odroidxu3.dtb > +- exynos5422-odroidxu4.dtb > > Supported kernel files are: > - Image.itb > Thank you for correcting this. Acked-by: Przemyslaw Marczak Best regards, -- Przemyslaw Marczak Samsung R&D Institute Poland Samsung Electronics p.marczak at samsung.com