* [U-Boot] [PATCH] odroid: Update README with correct firmware link and XU4 support
@ 2016-04-08 3:06 Shawn Guo
2016-04-08 6:54 ` Przemyslaw Marczak
2016-04-08 14:04 ` Anand Moon
0 siblings, 2 replies; 4+ messages in thread
From: Shawn Guo @ 2016-04-08 3:06 UTC (permalink / raw)
To: u-boot
The firmware from link [1] only works with U-Boot image that is no
bigger than 328KiB. Using it with the default mainline U-Boot today
which is already around 500KiB is just not working. Correct the link
to be hardkernel_1mb_uboot one [2], so that users can get mainline
U-Boot work out of box.
While at it, the README is updated to include XU4 support, like DTB file
name.
[1] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
[2] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
doc/README.odroid | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/doc/README.odroid b/doc/README.odroid
index ef243d1bde36..c088ec4cb08f 100644
--- a/doc/README.odroid
+++ b/doc/README.odroid
@@ -1,11 +1,11 @@
- U-Boot for Odroid X2/U3/XU3
+ U-Boot for Odroid X2/U3/XU3/XU4
========================
1. Summary
==========
This is a quick instruction for setup Odroid boards.
Board config: odroid_config for X2/U3
-Board config: odroid-xu3_config for XU3
+Board config: odroid-xu3_config for XU3/XU4
2. Supported devices
====================
@@ -14,6 +14,7 @@ This U-BOOT config can be used on three boards:
- Odroid X2
with CPU Exynos 4412 rev 2.0 and 2GB of RAM
- Odroid XU3
+- Odroid XU4
with CPU Exynos5422 and 2GB of RAM
3. Boot sequence
@@ -29,9 +30,9 @@ http://dev.odroid.com/projects/4412boot/wiki/FrontPage?action=download&value=boo
or here:
http://odroid.in/guides/ubuntu-lfs/boot.tar.gz
-<< XU3 >>
+<< XU3/XU4 >>
It can be downloaded from:
-https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
+https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
4. Boot media layout
@@ -120,6 +121,7 @@ Supported fdt files are:
- exynos4412-odroidx2.dtb
- exynos4412-odroidu3.dtb
- exynos5422-odroidxu3.dtb
+- exynos5422-odroidxu4.dtb
Supported kernel files are:
- Image.itb
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] odroid: Update README with correct firmware link and XU4 support
2016-04-08 3:06 [U-Boot] [PATCH] odroid: Update README with correct firmware link and XU4 support Shawn Guo
@ 2016-04-08 6:54 ` Przemyslaw Marczak
2016-04-08 14:04 ` Anand Moon
1 sibling, 0 replies; 4+ messages in thread
From: Przemyslaw Marczak @ 2016-04-08 6:54 UTC (permalink / raw)
To: u-boot
Hello Shawn,
On 04/08/2016 05:06 AM, Shawn Guo wrote:
> The firmware from link [1] only works with U-Boot image that is no
> bigger than 328KiB. Using it with the default mainline U-Boot today
> which is already around 500KiB is just not working. Correct the link
> to be hardkernel_1mb_uboot one [2], so that users can get mainline
> U-Boot work out of box.
>
> While at it, the README is updated to include XU4 support, like DTB file
> name.
>
> [1] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
> [2] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
>
> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
> ---
> doc/README.odroid | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/doc/README.odroid b/doc/README.odroid
> index ef243d1bde36..c088ec4cb08f 100644
> --- a/doc/README.odroid
> +++ b/doc/README.odroid
> @@ -1,11 +1,11 @@
> - U-Boot for Odroid X2/U3/XU3
> + U-Boot for Odroid X2/U3/XU3/XU4
> ========================
>
> 1. Summary
> ==========
> This is a quick instruction for setup Odroid boards.
> Board config: odroid_config for X2/U3
> -Board config: odroid-xu3_config for XU3
> +Board config: odroid-xu3_config for XU3/XU4
>
> 2. Supported devices
> ====================
> @@ -14,6 +14,7 @@ This U-BOOT config can be used on three boards:
> - Odroid X2
> with CPU Exynos 4412 rev 2.0 and 2GB of RAM
> - Odroid XU3
> +- Odroid XU4
> with CPU Exynos5422 and 2GB of RAM
>
> 3. Boot sequence
> @@ -29,9 +30,9 @@ http://dev.odroid.com/projects/4412boot/wiki/FrontPage?action=download&value=boo
> or here:
> http://odroid.in/guides/ubuntu-lfs/boot.tar.gz
>
> -<< XU3 >>
> +<< XU3/XU4 >>
> It can be downloaded from:
> -https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
> +https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
>
>
> 4. Boot media layout
> @@ -120,6 +121,7 @@ Supported fdt files are:
> - exynos4412-odroidx2.dtb
> - exynos4412-odroidu3.dtb
> - exynos5422-odroidxu3.dtb
> +- exynos5422-odroidxu4.dtb
>
> Supported kernel files are:
> - Image.itb
>
Thank you for correcting this.
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] odroid: Update README with correct firmware link and XU4 support
2016-04-08 3:06 [U-Boot] [PATCH] odroid: Update README with correct firmware link and XU4 support Shawn Guo
2016-04-08 6:54 ` Przemyslaw Marczak
@ 2016-04-08 14:04 ` Anand Moon
2016-04-14 10:41 ` Minkyu Kang
1 sibling, 1 reply; 4+ messages in thread
From: Anand Moon @ 2016-04-08 14:04 UTC (permalink / raw)
To: u-boot
Hi Shawn,
On 8 April 2016 at 08:36, Shawn Guo <shawnguo@kernel.org> wrote:
> The firmware from link [1] only works with U-Boot image that is no
> bigger than 328KiB. Using it with the default mainline U-Boot today
> which is already around 500KiB is just not working. Correct the link
> to be hardkernel_1mb_uboot one [2], so that users can get mainline
> U-Boot work out of box.
>
> While at it, the README is updated to include XU4 support, like DTB file
> name.
>
> [1] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
> [2] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
>
> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
> ---
> doc/README.odroid | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/doc/README.odroid b/doc/README.odroid
> index ef243d1bde36..c088ec4cb08f 100644
> --- a/doc/README.odroid
> +++ b/doc/README.odroid
> @@ -1,11 +1,11 @@
> - U-Boot for Odroid X2/U3/XU3
> + U-Boot for Odroid X2/U3/XU3/XU4
> ========================
>
> 1. Summary
> ==========
> This is a quick instruction for setup Odroid boards.
> Board config: odroid_config for X2/U3
> -Board config: odroid-xu3_config for XU3
> +Board config: odroid-xu3_config for XU3/XU4
>
> 2. Supported devices
> ====================
> @@ -14,6 +14,7 @@ This U-BOOT config can be used on three boards:
> - Odroid X2
> with CPU Exynos 4412 rev 2.0 and 2GB of RAM
> - Odroid XU3
> +- Odroid XU4
> with CPU Exynos5422 and 2GB of RAM
>
> 3. Boot sequence
> @@ -29,9 +30,9 @@ http://dev.odroid.com/projects/4412boot/wiki/FrontPage?action=download&value=boo
> or here:
> http://odroid.in/guides/ubuntu-lfs/boot.tar.gz
>
> -<< XU3 >>
> +<< XU3/XU4 >>
> It can be downloaded from:
> -https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
> +https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
>
>
> 4. Boot media layout
> @@ -120,6 +121,7 @@ Supported fdt files are:
> - exynos4412-odroidx2.dtb
> - exynos4412-odroidu3.dtb
> - exynos5422-odroidxu3.dtb
> +- exynos5422-odroidxu4.dtb
>
> Supported kernel files are:
> - Image.itb
> --
> 1.9.1
>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Best Regards.
-Anand Moon
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] odroid: Update README with correct firmware link and XU4 support
2016-04-08 14:04 ` Anand Moon
@ 2016-04-14 10:41 ` Minkyu Kang
0 siblings, 0 replies; 4+ messages in thread
From: Minkyu Kang @ 2016-04-14 10:41 UTC (permalink / raw)
To: u-boot
On 08/04/16 23:04, Anand Moon wrote:
> Hi Shawn,
>
> On 8 April 2016 at 08:36, Shawn Guo <shawnguo@kernel.org> wrote:
>> The firmware from link [1] only works with U-Boot image that is no
>> bigger than 328KiB. Using it with the default mainline U-Boot today
>> which is already around 500KiB is just not working. Correct the link
>> to be hardkernel_1mb_uboot one [2], so that users can get mainline
>> U-Boot work out of box.
>>
>> While at it, the README is updated to include XU4 support, like DTB file
>> name.
>>
>> [1] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
>> [2] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
>>
>> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
>> ---
>> doc/README.odroid | 10 ++++++----
>> 1 file changed, 6 insertions(+), 4 deletions(-)
>>
>> diff --git a/doc/README.odroid b/doc/README.odroid
>> index ef243d1bde36..c088ec4cb08f 100644
>> --- a/doc/README.odroid
>> +++ b/doc/README.odroid
>> @@ -1,11 +1,11 @@
>> - U-Boot for Odroid X2/U3/XU3
>> + U-Boot for Odroid X2/U3/XU3/XU4
>> ========================
>>
>> 1. Summary
>> ==========
>> This is a quick instruction for setup Odroid boards.
>> Board config: odroid_config for X2/U3
>> -Board config: odroid-xu3_config for XU3
>> +Board config: odroid-xu3_config for XU3/XU4
>>
>> 2. Supported devices
>> ====================
>> @@ -14,6 +14,7 @@ This U-BOOT config can be used on three boards:
>> - Odroid X2
>> with CPU Exynos 4412 rev 2.0 and 2GB of RAM
>> - Odroid XU3
>> +- Odroid XU4
>> with CPU Exynos5422 and 2GB of RAM
>>
>> 3. Boot sequence
>> @@ -29,9 +30,9 @@ http://dev.odroid.com/projects/4412boot/wiki/FrontPage?action=download&value=boo
>> or here:
>> http://odroid.in/guides/ubuntu-lfs/boot.tar.gz
>>
>> -<< XU3 >>
>> +<< XU3/XU4 >>
>> It can be downloaded from:
>> -https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel
>> +https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot
>>
>>
>> 4. Boot media layout
>> @@ -120,6 +121,7 @@ Supported fdt files are:
>> - exynos4412-odroidx2.dtb
>> - exynos4412-odroidu3.dtb
>> - exynos5422-odroidxu3.dtb
>> +- exynos5422-odroidxu4.dtb
>>
>> Supported kernel files are:
>> - Image.itb
>> --
>> 1.9.1
>>
>
> Reviewed-by: Anand Moon <linux.amoon@gmail.com>
>
> Best Regards.
> -Anand Moon
>
>
Applied to u-boot-samsung.
Thanks,
Minkyu Kang.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-04-14 10:41 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-04-08 3:06 [U-Boot] [PATCH] odroid: Update README with correct firmware link and XU4 support Shawn Guo
2016-04-08 6:54 ` Przemyslaw Marczak
2016-04-08 14:04 ` Anand Moon
2016-04-14 10:41 ` Minkyu Kang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox