[U-Boot] [uboot] [PATCH v4 4/7] net: phy: ti: Allow the driver to be more configurable

[Dan Murphy <dmurphy@ti.com>]

On 04/11/2016 02:08 AM, Michal Simek wrote:
> On 8.4.2016 18:08, Dan Murphy wrote:
>> Not all devices use the same internal delay or fifo depth.
>> Add the ability to set the internal delay for rx or tx and the
>> fifo depth via the devicetree.  If the value is not set in the
>> devicetree then set the delay to the default.
>>
>> If devicetree is not used then use the default defines within the
>> driver.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> ---
>>
>> v4 - Rebased the driver and changed default values to -1
>>
>>  drivers/net/phy/ti.c | 85 +++++++++++++++++++++++++++++++++++++++++++++-------
>>  1 file changed, 75 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c
>> index 937426b..922f0a4 100644
>> --- a/drivers/net/phy/ti.c
>> +++ b/drivers/net/phy/ti.c
>> @@ -6,6 +6,14 @@
>>   */
>>  #include <common.h>
>>  #include <phy.h>
>> +#include <linux/compat.h>
>> +#include <malloc.h>
>> +
>> +#include <fdtdec.h>
>> +#include <dm.h>
>> +#include <dt-bindings/net/ti-dp83867.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>>  
>>  /* TI DP83867 */
>>  #define DP83867_DEVADDR		0x1f
>> @@ -71,6 +79,17 @@
>>  #define MII_MMD_CTRL_INCR_RDWT	0x8000 /* post increment on reads & writes */
>>  #define MII_MMD_CTRL_INCR_ON_WT	0xC000 /* post increment on writes only */
>>  
>> +/* User setting - can be taken from DTS */
>> +#define DEFAULT_RX_ID_DELAY	DP83867_RGMIIDCTL_2_25_NS
>> +#define DEFAULT_TX_ID_DELAY	DP83867_RGMIIDCTL_2_75_NS
>> +#define DEFAULT_FIFO_DEPTH	DP83867_PHYCR_FIFO_DEPTH_4_B_NIB
>> +
>> +struct dp83867_private {
>> +	int rx_id_delay;
>> +	int tx_id_delay;
>> +	int fifo_depth;
>> +};
>> +
>>  /**
>>   * phy_read_mmd_indirect - reads data from the MMD registers
>>   * @phydev: The PHY device bus
>> @@ -148,16 +167,58 @@ static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
>>  		phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID;
>>  }
>>  
>> -/* User setting - can be taken from DTS */
>> -#define RX_ID_DELAY	8
>> -#define TX_ID_DELAY	0xa
>> -#define FIFO_DEPTH	1
>> +#if defined(CONFIG_DM_ETH)
>> +/**
>> + * dp83867_data_init - Convenience function for setting PHY specific data
>> + *
>> + * @phydev: the phy_device struct
>> + */
>> +static int dp83867_of_init(struct phy_device *phydev)
>> +{
>> +	struct dp83867_private *dp83867 = phydev->priv;
>> +	struct udevice *dev = phydev->dev;
>> +
>> +	dp83867->rx_id_delay = fdtdec_get_uint(gd->fdt_blob, dev->of_offset,
>> +				 "ti,rx_internal_delay", -1);
>> +
>> +	dp83867->tx_id_delay = fdtdec_get_uint(gd->fdt_blob, dev->of_offset,
>> +				 "ti,tx_internal_delay", -1);
>> +
>> +	dp83867->fifo_depth = fdtdec_get_uint(gd->fdt_blob, dev->of_offset,
>> +				 "ti,fifo_depth", -1);
>> +
> These names are still incompatible with binding you have.
> There are dashes instead of underscores.

OK fixed in new version.

>
>
>> +	return 0;
>> +}
>> +#else
>> +static int dp83867_of_init(struct phy_device *phydev)
>> +{
>> +	dp83867->rx_id_delay = DEFAULT_RX_ID_DELAY;
>> +	dp83867->tx_id_delay = DEFAULT_TX_ID_DELAY;
>> +	dp83867->fifo_depth = DEFAULT_FIFO_DEPTH;
>> +
>> +	return 0;
>> +}
>> +#endif
>>  
>>  static int dp83867_config(struct phy_device *phydev)
>>  {
>> +	struct dp83867_private *dp83867;
>>  	unsigned int val, delay, cfg2;
>>  	int ret;
>>  
>> +	if (!phydev->priv) {
>> +		dp83867 = kzalloc(sizeof(*dp83867), GFP_KERNEL);
>> +		if (!dp83867)
>> +			return -ENOMEM;
>> +
>> +		phydev->priv = dp83867;
>> +		ret = dp83867_of_init(phydev);
>> +		if (ret)
>> +			goto err_out;
>> +	} else {
>> +		dp83867 = (struct dp83867_private *)phydev->priv;
>> +	}
>> +
>>  	/* Restart the PHY.  */
>>  	val = phy_read(phydev, MDIO_DEVAD_NONE, DP83867_CTRL);
>>  	phy_write(phydev, MDIO_DEVAD_NONE, DP83867_CTRL,
>> @@ -166,9 +227,9 @@ static int dp83867_config(struct phy_device *phydev)
>>  	if (phy_interface_is_rgmii(phydev)) {
>>  		ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
>>  			(DP83867_MDI_CROSSOVER_AUTO << DP83867_MDI_CROSSOVER) |
>> -			(FIFO_DEPTH << DP83867_PHYCR_FIFO_DEPTH_SHIFT));
>> +			(dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT));
>>  		if (ret)
>> -			return ret;
>> +			goto err_out;
>>  	} else {
>>  		phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR,
>>  			  (BMCR_ANENABLE | BMCR_FULLDPLX | BMCR_SPEED1000));
>> @@ -189,8 +250,8 @@ static int dp83867_config(struct phy_device *phydev)
>>  			  DP83867_PHYCTRL_SGMIIEN |
>>  			  (DP83867_MDI_CROSSOVER_MDIX <<
>>  			  DP83867_MDI_CROSSOVER) |
>> -			  (FIFO_DEPTH << DP83867_PHYCTRL_RXFIFO_SHIFT) |
>> -			  (FIFO_DEPTH  << DP83867_PHYCTRL_TXFIFO_SHIFT));
>> +			  (dp83867->fifo_depth << DP83867_PHYCTRL_RXFIFO_SHIFT) |
>> +			  (dp83867->fifo_depth  << DP83867_PHYCTRL_TXFIFO_SHIFT));
>                                               ^^
> Here are 2 spaces instead of 1

Removed

>
>>  		phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_BISCR, 0x0);
>>  	}
>>  
>> @@ -212,8 +273,8 @@ static int dp83867_config(struct phy_device *phydev)
>>  		phy_write_mmd_indirect(phydev, DP83867_RGMIICTL,
>>  				       DP83867_DEVADDR, phydev->addr, val);
>>  
>> -		delay = (RX_ID_DELAY |
>> -			 (TX_ID_DELAY << DP83867_RGMII_TX_CLK_DELAY_SHIFT));
>> +		delay = (dp83867->rx_id_delay |
>> +			 (dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT));
>>  
>>  		phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL,
>>  				       DP83867_DEVADDR, phydev->addr, delay);
>> @@ -221,6 +282,10 @@ static int dp83867_config(struct phy_device *phydev)
>>  
>>  	genphy_config_aneg(phydev);
>>  	return 0;
>> +
>> +err_out:
>> +	kfree(dp83867);
>> +	return ret;
>>  }
>>  
>>  static struct phy_driver DP83867_driver = {
>>
> This patch is breaking 80 chars limit reported by checkpatch.


80 char limit is not an Error it is a Warning.
Well this is up to the maintainer.  This is the way the driver is written in the kernel.

I want to keep the uboot file as close to the way I wrote it in the kernel.  The same
warnings appear in the kernel code and this was accepted

Dan

>
> Thanks,
> Michal


-- 
------------------
Dan Murphy