[U-Boot] [PATCH] efi_loader: Always flush in cache line size granularity

[Marek Vasut <marex@denx.de>]

On 04/12/2016 02:39 AM, Tom Rini wrote:
> On Mon, Apr 11, 2016 at 12:36:33AM +0200, Marek Vasut wrote:
> 
>> On 04/11/2016 12:31 AM, Alexander Graf wrote:
>>>
>>>
>>> On 11.04.16 00:24, Andreas F?rber wrote:
>>>> Am 04.04.2016 um 09:32 schrieb Alexander Graf:
>>>>> The cache line flush helpers only work properly when they get aligned
>>>>> start and end addresses. Round our flush range to cache line size. It's
>>>>> safe because we're guaranteed to flush within a single page which has the
>>>>> same cache attributes.
>>>>>
>>>>> Reported-by: Marek Vasut <marex@denx.de>
>>>>> Signed-off-by: Alexander Graf <agraf@suse.de>
>>>>> ---
>>>>>  lib/efi_loader/efi_runtime.c | 3 ++-
>>>>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/lib/efi_loader/efi_runtime.c b/lib/efi_loader/efi_runtime.c
>>>>> index 22bcd08..40acec0 100644
>>>>> --- a/lib/efi_loader/efi_runtime.c
>>>>> +++ b/lib/efi_loader/efi_runtime.c
>>>>> @@ -194,7 +194,8 @@ void efi_runtime_relocate(ulong offset, struct efi_mem_desc *map)
>>>>>  #endif
>>>>>  
>>>>>  		*p = newaddr;
>>>>> -		flush_dcache_range((ulong)p, (ulong)&p[1]);
>>>>> +		flush_dcache_range((ulong)p & ~(CONFIG_SYS_CACHELINE_SIZE - 1),
>>>>> +			ALIGN((ulong)&p[1], CONFIG_SYS_CACHELINE_SIZE));
>>>>
>>>> dragonboard410c_defconfig fails to build with this due to undefined
>>>> CONFIG_SYS_CACHELINE_SIZE. Do we need to #ifdef here or is the
>>>> dragonboard410c at fault for not defining it?
>>>
>>> Some USB drivers use it unconditionally, but I guess the dragonboard401c
>>> doesn't enable USB.
>>>
>>> Let me come up with a more compatible version.
>>
>> This version is fine, dragonboard needs fixing. Every single board must
>> define CONFIG_SYS_CACHELINE_SIZE .
> 
> Yeah... but this isn't quite the right time to break all of:
>        arm:  +   mx28evk integratorap_cm720t at91sam9261ek_dataflash_cs3
>        at91sam9261ek_dataflash_cs0 integratorap_cm946es mx28evk_nand
>        integratorcp_cm1136 at91sam9x5ek_nandflash
>        at91sam9xeek_dataflash_cs1 at91sam9260ek_dataflash_cs0
>        at91sam9260ek_dataflash_cs1 at91sam9g20ek_nandflash
>        meesc_dataflash at91sam9260ek_nandflash mx35pdk xfi3
>        at91sam9263ek_dataflash_cs0 at91sam9xeek_dataflash_cs0
>        at91sam9xeek_nandflash bg0900 highbank sansa_fuze_plus mx25pdk
>        mx23evk at91sam9x5ek_mmc igep0030_nand m28evk
>        at91sam9g20ek_dataflash_cs1 at91sam9g20ek_dataflash_cs0
>        integratorcp_cm946es at91sam9n12ek_nandflash
>        at91sam9n12ek_spiflash da850_am18xxevm devkit3250
>        at91rm9200ek_ram picosam9g45 at91sam9n12ek_mmc
>        integratorcp_cm926ejs integratorap_cm920t
>        at91sam9m10g45ek_nandflash sc_sps_1 omapl138_lcdk mx28evk_spi
>        integratorap_cm926ejs at91sam9rlek_mmc apx4devkit mx23_olinuxino
>        at91sam9x5ek_spiflash at91sam9g10ek_nandflash
>        at91sam9g10ek_dataflash_cs3 at91sam9g10ek_dataflash_cs0
>        at91sam9g20ek_2mmc_nandflash apf27 stv0991
>        at91sam9261ek_nandflash at91rm9200ek at91sam9g20ek_2mmc
>        da850evm_direct_nor at91sam9263ek_norflash meesc
>        at91sam9263ek_dataflash at91sam9m10g45ek_mmc armadillo-800eva
>        at91sam9x5ek_dataflash da850evm usb_a9263_dataflash
>        at91sam9rlek_nandflash mx28evk_auart_console
>        at91sam9263ek_norflash_boot integratorcp_cm920t
>        at91sam9263ek_nandflash at91sam9rlek_dataflash  
> (and maybe a few more, toolchain here craps out due to libgcc problems),

Ha, libgcc ... :-(

> and we've talked about this before too I think.  The right long term
> answer is to borrow the logic of arch/arm/mm/Kconfig and asm/cache.h
> from the kernel to get the right size, always.  For the short term,
> we'll just work-around it.

I thought we fixed these cache issues already, but that was on v7 only,
dang. Now it is v4/v5 which broke.

-- 
Best regards,
Marek Vasut