[U-Boot] [PATCH v2 2/2] dm: i2c: Add driver for Cadence I2C IP

[Michal Simek <michal.simek@xilinx.com>]

On 13.4.2016 07:44, Heiko Schocher wrote:
> Hello Michal,
> 
> Am 11.04.2016 um 14:55 schrieb Michal Simek:
>> From: Moritz Fischer <moritz.fischer@ettus.com>
>>
>> This is a possible drop in replacement for drivers/i2c/zynq-i2c.c
>>
>> Since this is cadence IP it has been renamed to cdns-i2c,
>> to make sense with the compatible string.
>>
>> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
>> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
>> ---
>>
>> Changes in v2:
>> - Use dev_get_addr for reading address.
>>
>> This driver will be used by ZynqMP. Zynq will use zynq-i2c driver
>> till eeprom interface is fixed but this driver can be also enabled for
>> Zynq targets.
>>
>> ---
>>   drivers/i2c/Kconfig    |   7 ++
>>   drivers/i2c/Makefile   |   1 +
>>   drivers/i2c/i2c-cdns.c | 335
>> +++++++++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 343 insertions(+)
>>   create mode 100644 drivers/i2c/i2c-cdns.c
> 
> Reviewed-by: Heiko Schocher <hs@denx.de>

Do you want me to take this via my xilinx tree? Or are you going to take
it via i2c tree?

Thanks,
Michal