From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Wed, 13 Apr 2016 08:24:24 +0200 Subject: [U-Boot] [PATCH v2 2/2] dm: i2c: Add driver for Cadence I2C IP In-Reply-To: <570DE335.1070604@denx.de> References: <29692668b6d7b34293dae8997f9522ab102cfe2a.1460379306.git.michal.simek@xilinx.com> <5b4b55689814f073948c224d0f6db7ec933846fc.1460379306.git.michal.simek@xilinx.com> <570DDCDA.4070206@denx.de> <570DE09C.8070101@xilinx.com> <570DE335.1070604@denx.de> Message-ID: <570DE618.1000505@xilinx.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 13.4.2016 08:12, Heiko Schocher wrote: > Hello Michal, > > Am 13.04.2016 um 08:01 schrieb Michal Simek: >> On 13.4.2016 07:44, Heiko Schocher wrote: >>> Hello Michal, >>> >>> Am 11.04.2016 um 14:55 schrieb Michal Simek: >>>> From: Moritz Fischer >>>> >>>> This is a possible drop in replacement for drivers/i2c/zynq-i2c.c >>>> >>>> Since this is cadence IP it has been renamed to cdns-i2c, >>>> to make sense with the compatible string. >>>> >>>> Signed-off-by: Moritz Fischer >>>> Signed-off-by: Michal Simek >>>> --- >>>> >>>> Changes in v2: >>>> - Use dev_get_addr for reading address. >>>> >>>> This driver will be used by ZynqMP. Zynq will use zynq-i2c driver >>>> till eeprom interface is fixed but this driver can be also enabled for >>>> Zynq targets. >>>> >>>> --- >>>> drivers/i2c/Kconfig | 7 ++ >>>> drivers/i2c/Makefile | 1 + >>>> drivers/i2c/i2c-cdns.c | 335 >>>> +++++++++++++++++++++++++++++++++++++++++++++++++ >>>> 3 files changed, 343 insertions(+) >>>> create mode 100644 drivers/i2c/i2c-cdns.c >>> >>> Reviewed-by: Heiko Schocher >> >> Do you want me to take this via my xilinx tree? Or are you going to take >> it via i2c tree? > > I just wanted to create an i2c pull request, but I had a problem with > another patch ... so, if you want to pick it up, it is fine for me. ok. I will take it via my tree. Going to create PR today. Thanks, Michal