public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] fastboot: Fix wMaxPacketSize for High-Speed IN endpoint
Date: Wed, 13 Apr 2016 10:19:51 +0300	[thread overview]
Message-ID: <570DF317.9090606@ti.com> (raw)
In-Reply-To: <CAM7GXo=w4FsfZNcaMk1qTVKTn8FfFdxOo7wadVSjqEgAj60vYg@mail.gmail.com>

On 13/04/16 04:42, Steve Rae wrote:
> Hi Roger,
> 
> On Tue, Apr 12, 2016 at 6:54 AM, Lukasz Majewski <l.majewski@samsung.com> wrote:
>> Hi Roger,
>>
>>> wMaxPacketSize for IN endpoing in High-Speed must be 512 and not 64.
>>> While fixing that we do some clean ups like
>>>
>>> - use cpu_to_le16(decimal_length) instead of hexadecimal length.
>>> - No need to initialize bInterval to 0. Static variables are 0
>>> initialized.
>>> - Move descriptor setting from fastboot_add to to fastboot_bind.
>>> - check for dual speed configuration before setting the high speed
>>> descriptors.
>>
>> Fixes are correct, but I think that there would be a problem with
>> Broadcomm boards when you change EP IN max packet from 64 to 512B.
>>
>> We had such discussion previously:
>>
>> https://www.mail-archive.com/u-boot at lists.denx.de/msg201596.html
>>
>> I think that Steve would say more about this.
> 
> That was a different issue -- nothing to do with the size of the endpoints.....
> 
> Tested-by: Steve Rae <srae@broadcom.com>
> [Test HW: bcm235xx board]

Thanks :)

> 
> Thanks, Steve
> PS. however, it does NOT solve the issue is the other thread, I still
> need to patch with the following in order to get the download to not
> stall on the last packet:

Yes, that issue still needs to be fixed correctly. I understood that
Sam is working on it.

cheers,
-roger

> 
> 
> diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
> index eddc6b9..2633503 100644
> --- a/drivers/usb/gadget/f_fastboot.c
> +++ b/drivers/usb/gadget/f_fastboot.c
> @@ -456,12 +456,17 @@ static unsigned int rx_bytes_expected(unsigned
> int maxpacket)
>                 return 0;
>         if (rx_remain > EP_BUFFER_SIZE)
>                 return EP_BUFFER_SIZE;
> +
> +rem = rx_remain % maxpacket;
> +printf("\n\n **** SRAE: code removed: rx_remain=%d, maxpacket=%d,
> rem=%d\n", rx_remain, maxpacket, rem);
> +#if 0
>         if (rx_remain < maxpacket) {
>                 rx_remain = maxpacket;
>         } else if (rx_remain % maxpacket != 0) {
>                 rem = rx_remain % maxpacket;
>                 rx_remain = rx_remain + (maxpacket - rem);
>         }
> +#endif
>         return rx_remain;
>  }
> 
> 
> 
> 
>>
>>>
>>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>>> ---
>>>  drivers/usb/gadget/f_fastboot.c | 36
>>> +++++++++++++++++++++++++++--------- 1 file changed, 27
>>> insertions(+), 9 deletions(-)
>>>
>>> diff --git a/drivers/usb/gadget/f_fastboot.c
>>> b/drivers/usb/gadget/f_fastboot.c index 2e87fee..e1038ea 100644
>>> --- a/drivers/usb/gadget/f_fastboot.c
>>> +++ b/drivers/usb/gadget/f_fastboot.c
>>> @@ -64,8 +64,7 @@ static struct usb_endpoint_descriptor fs_ep_in = {
>>>       .bDescriptorType    = USB_DT_ENDPOINT,
>>>       .bEndpointAddress   = USB_DIR_IN,
>>>       .bmAttributes       = USB_ENDPOINT_XFER_BULK,
>>> -     .wMaxPacketSize     = TX_ENDPOINT_MAXIMUM_PACKET_SIZE,
>>> -     .bInterval          = 0x00,
>>> +     .wMaxPacketSize     = cpu_to_le16(64),
>>>  };
>>>
>>>  static struct usb_endpoint_descriptor fs_ep_out = {
>>> @@ -73,8 +72,15 @@ static struct usb_endpoint_descriptor fs_ep_out = {
>>>       .bDescriptorType        = USB_DT_ENDPOINT,
>>>       .bEndpointAddress       = USB_DIR_OUT,
>>>       .bmAttributes           = USB_ENDPOINT_XFER_BULK,
>>> -     .wMaxPacketSize         =
>>> RX_ENDPOINT_MAXIMUM_PACKET_SIZE_1_1,
>>> -     .bInterval              = 0x00,
>>> +     .wMaxPacketSize         = cpu_to_le16(64),
>>> +};
>>> +
>>> +static struct usb_endpoint_descriptor hs_ep_in = {
>>> +     .bLength                = USB_DT_ENDPOINT_SIZE,
>>> +     .bDescriptorType        = USB_DT_ENDPOINT,
>>> +     .bEndpointAddress       = USB_DIR_IN,
>>> +     .bmAttributes           = USB_ENDPOINT_XFER_BULK,
>>> +     .wMaxPacketSize         = cpu_to_le16(512),
>>>  };
>>>
>>>  static struct usb_endpoint_descriptor hs_ep_out = {
>>> @@ -82,8 +88,7 @@ static struct usb_endpoint_descriptor hs_ep_out = {
>>>       .bDescriptorType        = USB_DT_ENDPOINT,
>>>       .bEndpointAddress       = USB_DIR_OUT,
>>>       .bmAttributes           = USB_ENDPOINT_XFER_BULK,
>>> -     .wMaxPacketSize         =
>>> RX_ENDPOINT_MAXIMUM_PACKET_SIZE_2_0,
>>> -     .bInterval              = 0x00,
>>> +     .wMaxPacketSize         = cpu_to_le16(512),
>>>  };
>>>
>>>  static struct usb_interface_descriptor interface_desc = {
>>> @@ -97,9 +102,15 @@ static struct usb_interface_descriptor
>>> interface_desc = { .bInterfaceProtocol        =
>>> FASTBOOT_INTERFACE_PROTOCOL, };
>>>
>>> -static struct usb_descriptor_header *fb_runtime_descs[] = {
>>> +static struct usb_descriptor_header *fb_fs_function[] = {
>>>       (struct usb_descriptor_header *)&interface_desc,
>>>       (struct usb_descriptor_header *)&fs_ep_in,
>>> +     (struct usb_descriptor_header *)&fs_ep_out,
>>> +};
>>> +
>>> +static struct usb_descriptor_header *fb_hs_function[] = {
>>> +     (struct usb_descriptor_header *)&interface_desc,
>>> +     (struct usb_descriptor_header *)&hs_ep_in,
>>>       (struct usb_descriptor_header *)&hs_ep_out,
>>>       NULL,
>>>  };
>>> @@ -177,7 +188,15 @@ static int fastboot_bind(struct
>>> usb_configuration *c, struct usb_function *f) return -ENODEV;
>>>       f_fb->out_ep->driver_data = c->cdev;
>>>
>>> -     hs_ep_out.bEndpointAddress = fs_ep_out.bEndpointAddress;
>>> +     f->descriptors = fb_fs_function;
>>> +
>>> +     if (gadget_is_dualspeed(gadget)) {
>>> +             /* Assume endpoint addresses are the same for both
>>> speeds */
>>> +             hs_ep_in.bEndpointAddress =
>>> fs_ep_in.bEndpointAddress;
>>> +             hs_ep_out.bEndpointAddress =
>>> fs_ep_out.bEndpointAddress;
>>> +             /* copy HS descriptors */
>>> +             f->hs_descriptors = fb_hs_function;
>>> +     }
>>>
>>>       s = getenv("serial#");
>>>       if (s)
>>> @@ -302,7 +321,6 @@ static int fastboot_add(struct usb_configuration
>>> *c) }
>>>
>>>       f_fb->usb_function.name = "f_fastboot";
>>> -     f_fb->usb_function.hs_descriptors = fb_runtime_descs;
>>>       f_fb->usb_function.bind = fastboot_bind;
>>>       f_fb->usb_function.unbind = fastboot_unbind;
>>>       f_fb->usb_function.set_alt = fastboot_set_alt;
>>
>>
>>
>> --
>> Best regards,
>>
>> Lukasz Majewski
>>
>> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group

  reply	other threads:[~2016-04-13  7:19 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-12 12:51 [U-Boot] [PATCH 0/2] uboot: fastboot: fix high speed endpoint descriptors Roger Quadros
2016-04-12 12:51 ` [U-Boot] [PATCH 1/2] fastboot: Fix wMaxPacketSize for High-Speed IN endpoint Roger Quadros
2016-04-12 13:54   ` Lukasz Majewski
2016-04-13  1:42     ` Steve Rae
2016-04-13  7:19       ` Roger Quadros [this message]
2016-04-13  2:18   ` Steve Rae
2016-04-13  2:34     ` Hong Chen
2016-04-12 12:51 ` [U-Boot] [PATCH 2/2] fastboot: Enable the respective speed endpoints at runtime Roger Quadros
2016-04-12 13:47   ` Lukasz Majewski
2016-04-13  1:43     ` Steve Rae
2016-04-13  8:30   ` [U-Boot] [PATCH v2 " Roger Quadros

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=570DF317.9090606@ti.com \
    --to=rogerq@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox