[U-Boot] [PATCH 09/16] defconfig: Add configs for AM43xx secure parts

[Lokesh Vutla <lokeshvutla@ti.com>]

On Tuesday 12 April 2016 05:07 AM, Daniel Allred wrote:
> From: Madan Srinivas <madans@ti.com>
> 
> Adds new defconfig files for AM43xx secure devices.
> These are the same as the non-secure parts, except for
> 	CONFIG_TI_SECURE_DEVICE option set to 'y'
> 	CONFIG_ISW_ENTRY_ADDR updated for secure images.
> 
> Signed-off-by: Daniel Allred <d-allred@ti.com>
> Signed-off-by: Madan Srinivas <madans@ti.com>
> ---
>  configs/am43xx_hs_evm_defconfig              | 12 ++++++++++++
>  configs/am43xx_hs_evm_ethboot_defconfig      | 11 +++++++++++
>  configs/am43xx_hs_evm_qspiboot_defconfig     | 10 ++++++++++
>  configs/am43xx_hs_evm_rtconly_defconfig      | 12 ++++++++++++

You do not need this defconfig. Also now only DT enabled configs are
accepted. Ill let Tom to comment here.

Thanks and regards,
Lokesh

>  configs/am43xx_hs_evm_usbhost_boot_defconfig | 11 +++++++++++
>  configs/am43xx_hs_evm_usbspl_defconfig       | 12 ++++++++++++
>  6 files changed, 68 insertions(+)
>  create mode 100644 configs/am43xx_hs_evm_defconfig
>  create mode 100644 configs/am43xx_hs_evm_ethboot_defconfig
>  create mode 100644 configs/am43xx_hs_evm_qspiboot_defconfig
>  create mode 100644 configs/am43xx_hs_evm_rtconly_defconfig
>  create mode 100644 configs/am43xx_hs_evm_usbhost_boot_defconfig
>  create mode 100644 configs/am43xx_hs_evm_usbspl_defconfig
> 
> diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig
> new file mode 100644
> index 0000000..a79a82b
> --- /dev/null
> +++ b/configs/am43xx_hs_evm_defconfig
> @@ -0,0 +1,12 @@
> +CONFIG_ARM=y
> +CONFIG_AM43XX=y
> +CONFIG_TI_SECURE_DEVICE=y
> +CONFIG_TARGET_AM43XX_EVM=y
> +CONFIG_SPL=y
> +CONFIG_ISW_ENTRY_ADDR=0x40302ae0
> +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_SPI_FLASH=y
> diff --git a/configs/am43xx_hs_evm_ethboot_defconfig b/configs/am43xx_hs_evm_ethboot_defconfig
> new file mode 100644
> index 0000000..06729fd
> --- /dev/null
> +++ b/configs/am43xx_hs_evm_ethboot_defconfig
> @@ -0,0 +1,11 @@
> +CONFIG_ARM=y
> +CONFIG_AM43XX=y
> +CONFIG_TI_SECURE_DEVICE=y
> +CONFIG_TARGET_AM43XX_EVM=y
> +CONFIG_SPL=y
> +CONFIG_ISW_ENTRY_ADDR=0x40302ae0
> +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_ETH_SUPPORT"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_SPI_FLASH=y
> diff --git a/configs/am43xx_hs_evm_qspiboot_defconfig b/configs/am43xx_hs_evm_qspiboot_defconfig
> new file mode 100644
> index 0000000..8ae4672
> --- /dev/null
> +++ b/configs/am43xx_hs_evm_qspiboot_defconfig
> @@ -0,0 +1,10 @@
> +CONFIG_ARM=y
> +CONFIG_AM43XX=y
> +CONFIG_TI_SECURE_DEVICE=y
> +CONFIG_TARGET_AM43XX_EVM=y
> +CONFIG_ISW_ENTRY_ADDR=0x30002ae0
> +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,QSPI,QSPI_BOOT"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_SPI_FLASH=y
> diff --git a/configs/am43xx_hs_evm_rtconly_defconfig b/configs/am43xx_hs_evm_rtconly_defconfig
> new file mode 100644
> index 0000000..25c2db2
> --- /dev/null
> +++ b/configs/am43xx_hs_evm_rtconly_defconfig
> @@ -0,0 +1,12 @@
> +CONFIG_ARM=y
> +CONFIG_AM43XX=y
> +CONFIG_TI_SECURE_DEVICE=y
> +CONFIG_TARGET_AM43XX_EVM=y
> +CONFIG_SPL=y
> +CONFIG_ISW_ENTRY_ADDR=0x40302ae0
> +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_RTC_ONLY_SUPPORT"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_SPI_FLASH=y
> diff --git a/configs/am43xx_hs_evm_usbhost_boot_defconfig b/configs/am43xx_hs_evm_usbhost_boot_defconfig
> new file mode 100644
> index 0000000..776f669
> --- /dev/null
> +++ b/configs/am43xx_hs_evm_usbhost_boot_defconfig
> @@ -0,0 +1,11 @@
> +CONFIG_ARM=y
> +CONFIG_AM43XX=y
> +CONFIG_TI_SECURE_DEVICE=y
> +CONFIG_TARGET_AM43XX_EVM=y
> +CONFIG_SPL=y
> +CONFIG_ISW_ENTRY_ADDR=0x40302ae0
> +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USB_HOST_SUPPORT"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_SPI_FLASH=y
> diff --git a/configs/am43xx_hs_evm_usbspl_defconfig b/configs/am43xx_hs_evm_usbspl_defconfig
> new file mode 100644
> index 0000000..5a3f566
> --- /dev/null
> +++ b/configs/am43xx_hs_evm_usbspl_defconfig
> @@ -0,0 +1,12 @@
> +CONFIG_ARM=y
> +CONFIG_AM43XX=y
> +CONFIG_TI_SECURE_DEVICE=y
> +CONFIG_TARGET_AM43XX_EVM=y
> +CONFIG_SPL=y
> +CONFIG_ISW_ENTRY_ADDR=0x40302ae0
> +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USBETH_SUPPORT"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_SPI_FLASH=y
>