From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Date: Tue, 19 Apr 2016 13:21:55 +0300 Subject: [U-Boot] [PATCH 2/3] usb: s3c-otg: Fix short packet for request size > ep.maxpacket In-Reply-To: <20160419110243.577c277a@amdc2363> References: <1461050221-9268-1-git-send-email-rogerq@ti.com> <1461050221-9268-3-git-send-email-rogerq@ti.com> <20160419110243.577c277a@amdc2363> Message-ID: <571606C3.1060503@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Lukasz, On 19/04/16 12:02, Lukasz Majewski wrote: > Hi Roger, > >> Request size can be greater than ep.packet and still end in a >> short packet. We need to tackle this case as end of transfer >> (if short_not_ok is not set) as indicated in USB 2.0 Specification >> [1], else we get stuck up on certain protocols like fastboot. >> >> [1] - USB2.0 Specification, Section 5.3.2 Pipes >> >> Reported-by: Steve Rae >> Signed-off-by: Roger Quadros >> Tested-by: Steve Rae >> --- >> drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c >> b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c index bce9c30..a31d875 >> 100644 --- a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c >> +++ b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c >> @@ -229,7 +229,7 @@ static void complete_rx(struct dwc2_udc *dev, u8 >> ep_num) ROUND(xfer_size, CONFIG_SYS_CACHELINE_SIZE)); >> >> req->req.actual += min(xfer_size, req->req.length - >> req->req.actual); >> - is_short = (xfer_size < ep->ep.maxpacket); >> + is_short = xfer_size % ep->ep.maxpacket; > > is_short is a flag - so maybe it would be better to write something > like: but it is defined as u32 so I thought it might as well print the short packet length instead of just 1/0. > > is_short = !!(xfer_size % ep->ep.maxpacket)) ? > > I'm going to test those patches on my boards. I will share the results > ASAP. > >> >> debug_cond(DEBUG_OUT_EP != 0, >> "%s: RX DMA done : ep = %d, rx bytes = %d/%d, " > > > -- cheers, -roger