[U-Boot] igep0030_nand_defconfig compile is broken

Heiko Schocher
2016-04-25T09:36:33Z

Hello

on current HEAD of mainline code, compile for "igep0030_nand_defconfig"
is broken:

arm-linux-gnueabi-ld.bfd: u-boot-spl section `.data' will not fit in region `.sram'
arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 1176 bytes
scripts/Makefile.spl:247: recipe for target 'spl/u-boot-spl' failed
make[1]: *** [spl/u-boot-spl] Error 1
Makefile:1334: recipe for target 'spl/u-boot-spl' failed
make: *** [spl/u-boot-spl] Error 2

a git bisect shows:

$ git bisect bad
578ec3b1fb3f4e85d8243d442f66f308c94b791d is the first bad commit
commit 578ec3b1fb3f4e85d8243d442f66f308c94b791d
Author: Alexander Graf <agraf@suse.de>
Date: Mon Apr 11 16:16:21 2016 +0200

distro: Enable iso partition code

Now that we can properly boot EFI payloads from iso el torito
images, let's enable support for isos by default in the distro
header.

Signed-off-by: Alexander Graf <agraf@suse.de>

:040000 040000 ba4615980d26ef80e9b9e5ce9fc2440456c556cb 6d0ba56e5ed81ea54d37566763f3f225bd2d00ad M
include
pollux:u-boot hs [(kein Branch, bin?re Suche begonnen bei master)] $

buildman show 3 boards:

arm: + igep0030_nand
+arm-linux-gnueabi-ld.bfd: u-boot-spl section `.data' will not fit in region `.sram'
+arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 1236 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2
arm: + duovero
+arm-linux-gnueabi-ld.bfd: u-boot-spl section `.data' will not fit in region `.sram'
+arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 816 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2
arm: + igep0020_nand
+arm-linux-gnueabi-ld.bfd: u-boot-spl section `.data' will not fit in region `.sram'
+arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 1220 bytes
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2
517 0 40 /557 q8_a13_tablet

Could somebody provide a fix for this boards?

Thanks!

bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany